How We Made Our DIY Stained Glass Window
We had a different post planned for today, but a spontaneous little project landed in our laps Monday night and we couldn’t resist. We improvised a DIY technique as we went and were absolutely thrilled with the outcome. This might be my favorite under-$10 makeover ever, and it can be duplicated easily using any reclaimed window from a thrift shop, architectural salvage store, or a Habitat for Humanity ReStore. Save the old windows — they’re full of character!

This particular window came to me by chance on an evening walk. Our neighbors were loading a diamond-paned window into their truck to take to the dump and asked if I wanted it. Of course I did — I practically ran home clutching it. The street-facing side had purple paint, while the back was white. The frame was brittle and water-damaged, with missing trim in places, so at first I thought it might become a garden feature. But after a quick brainstorming session with John, we decided to bring it inside and give it a new life.

We started and finished this project in a matter of hours. The supplies were minimal: the secondhand window, two D-rings for hanging, about $9 worth of tissue paper, and a spray bottle of water. The goal was to keep the window indoors so it wouldn’t continue to deteriorate, and to introduce a bit of color to the white-on-white wall where it would hang.

We considered simply sealing and hanging the window as-is, but we wanted some color. Rather than hunting down glass paint (the nearest craft store was an hour away), we improvised with tissue paper to create a faux stained-glass effect. Tissue paper is inexpensive, removable, and allowed us to test colors and compositions quickly — if we didn’t like something, we could peel it off and try again.

We placed the window opposite the kitchen island, where a sconce above would illuminate the glass and show off the colors. Moving the framed beach print that had been there opened up the perfect spot. The window’s depth and wavy old glass make it especially beautiful in that light.

Before applying any tissue paper, we prepped the window for hanging and cleaned the glass. John attached heavy-duty D-rings to the back so the window would hang securely and level. We swapped out the original screws for slightly longer ones for added strength — just be careful they don’t poke through the front of the frame. We used drywall anchors that don’t require pre-drilling and took care to center the window beneath the sconce.

Next I spent about 30 minutes tidying the glass. I scraped away loose, crusty paint that overlapped the panes using a flat glass scraper and vacuumed up the flakes. We avoided sanding because old paint can contain lead and sanding can create airborne dust. After scraping, I wiped the glass clean with white vinegar in a spray bottle — a simple, effective glass cleaner.

We could have repaired or repainted the frame for a more polished look, but we liked the old, weathered character. Once the glass was clean and dry, we began the tissue paper application.

Full disclosure: our chihuahua Burger supervised the whole process and made several cameo appearances in the photos.

Prepping Your Window
Attach D-rings or another hanging system to the back of the frame, making sure they are equidistant from the top so the window hangs level. Replace D-ring screws with slightly longer screws for a better hold, but avoid screws that could puncture the front of the frame. Use sturdy anchors rated for your wall type and a level to position the window exactly where you want it.

After hanging the window temporarily to test placement, scrape any loose paint from the glass with a flat scraper, vacuum the debris, and clean the panes with a vinegar-and-water solution. Take precautions if the paint might be lead-based and avoid sanding that could generate dust.

Applying Your Tissue Paper
We tested a few approaches and settled on a simple, reliable method that worked best for this window.
1) Cut tissue paper roughly to size. It doesn’t need to be precise — a little overlap is good. You can fold sheets to cut multiple pieces at once.

2) Spray the glass generously with water from a spray bottle. You don’t want puddles, but moist glass helps the tissue adhere and conform to the panes.

3) Place a tissue sheet on the glass, starting from the center and smoothing gently toward the edges. Wet tissue is delicate, so use your fingers rather than a hard tool to avoid tearing. If you want deeper color, layer additional sheets: spray lightly over the first layer and press the next sheet in place.

Let the finished window dry flat and horizontal. Hanging it while wet would risk sticking to the wall and creating a mess. Our water-only method dried firmly with no bubbling or shifting, but we’ll update if anything changes over time. If the tissue ever loosens, you can try a diluted mix of Elmer’s Glue or Mod Podge applied behind the paper, though that can create more obvious texture.

Picking Your Colors & Pattern
We improvised the color scheme as we worked. Before applying to the window, test color combinations on a separate board so you can see how layers interact. Bright primary colors can look veiny when layered, while softer hues or layered translucent colors often resemble real stained glass more closely.

We experimented with layering — for example, placing a deep blue underneath two mint sheets or a red square behind two violet sheets — to create subtle variations in tone. You don’t need a strict, symmetrical design; an organic, random pattern can feel modern and painterly. We also left some panes untouched so the reflective wavy glass shows through, catching light and reflections around the room.

The final look hangs beautifully over the island and catches light in a way that photos don’t fully capture. It feels like a tiny, colorful artwork that suits our beach house’s vintage charm.

We’ll keep an eye on how the tissue-paper technique holds up over time and share any updates. For now, we’re delighted with this quick, inexpensive transformation that brought new life to a reclaimed window in just a few hours.

P.S. A note on supplies: tissue paper is budget-friendly and easy to source, but if you prefer a longer-lasting option, glass paint or a proper adhesive can be used instead. And take care when working with older windows that may have lead paint — avoid sanding and follow recommended safety precautions.
*This post contains affiliate links*








