Mount a Large Print on Canvas Using Acrylic Medium
How We Mounted Poster Prints to Canvas: Spray Adhesive vs. Acrylic Medium
Our bedroom horse prints finally arrived, so I’m sharing the full process of mounting them to canvas. I ended up trying two different methods: a quick spray adhesive approach that didn’t hold up, and a more reliable acrylic medium technique that worked well. If you’re planning a similar DIY, here’s what we learned, plus tips to help you get a long-lasting finish.
I started with an all-purpose spray adhesive (a $4 can from JoAnn with a coupon). Spray adhesives are common for mounting because many versions are acid-free—meaning they won’t damage prints—and are marketed as permanent. I worked in the sunroom for ventilation, wearing a mask, with windows and doors open and a fan running. Spray adhesives can be stinky, so do this in a well-ventilated space or outdoors.

The technique was straightforward: spray the back of the poster and the front of the canvas, then line up one corner and slowly lay the print down, smoothing as you go. I used my Kroger card to gently press and smooth the surface—gentle pressure prevents scratches or dents. I managed the first print alone and even grabbed a mid-process photo. Girl power.

After mounting both prints with spray adhesive I hung them and admired the result. But within about 12 hours the prints began to lift in places and form noticeable gaps between the print and the canvas. It wasn’t a clean failure—the edges and some sections started to separate and become wavy. Fortunately the prints peeled off easily, so I could start again without damaging them.

For the second attempt I searched for a heavier-duty adhesive method and found recommendations to use an acrylic medium. We used Liquitex Matte Varnish from Michael’s (bought with a coupon), which functions as a glue and varnish. This method requires a bit more time and care, but it produced a much sturdier bond.

I brushed a thin, even coat of acrylic medium onto the canvas surface and also applied a light coat to the back of the poster. With two people it was easier to align corners and roll the print down without creating creases: I had two corners, John had two, and we placed our corners first then smoothed toward the edges. This helped avoid bubbles and wrinkles. If you’re working solo, go slowly and press from the center outward to push out air pockets.


Acrylic medium can cause reactions for some people, so wearing thin latex gloves while handling it is a good precaution. After adhering the prints, we laid them flat to cure for a full 24 hours to prevent shifting or buckling while drying. After a day they felt firmly attached and have stayed put through steam from showers and normal bathroom humidity.


We debated painting the canvas sides charcoal, brown, or metallic, but decided to leave them white for a clean look that ties into the trim and mirror above the sink. We also opted not to apply a varnish or protective coat over the print faces—right now we like the smooth, print-like finish. If you do plan to seal the front with acrylic medium or Mod Podge, test a small hidden area first to ensure it doesn’t cloud the image.
Cost-wise, having these prints printed on stretched canvas at a pro shop would have been about $169 each for the size we wanted. We DIY’ed each one, including poster and large canvas, for roughly $64 apiece—so we saved over $200 in total. The acrylic medium method seems worth the extra effort for that savings and the secure finish.

One of the nicest surprises was how luminous the prints looked in person. A rough Photoshop mockup we made earlier didn’t capture that soft glow, and seeing them in place changed our minds about how they’d work with the rest of the room. They balance nicely with the lighter, airier elements in the house—dark, moody art can accent and complement quieter spaces rather than overwhelm them.

Decorating is about experimenting and trusting your taste. Small failures—like the spray adhesive attempt—are part of the learning curve. Trying bolder pieces alongside calmer elements has made our home feel more personal and interesting. If you’re considering mounting posters to canvas, here are the practical takeaways:
- Work in a well-ventilated area when using spray adhesives.
- For long-term adhesion, use acrylic medium (brush a thin coat on both canvas and print).
- Get an extra pair of hands to align and smooth large prints when possible.
- Lay mounted prints flat to cure for 24 hours to prevent shifting or buckling.
- Test any protective finish on a small area first to avoid clouding the image.

In short: spray adhesive can be fast but may not hold long-term. Acrylic medium takes a little more effort and time to cure but gives a much more secure bond. We’re happy with the results and the look, and hopefully these tips help you mount your own prints successfully.
Psst—If you’re thinking of taking decorating risks, try one small bold choice and see how it plays with the rest of your space. It may balance in ways you don’t expect.








