Never Buy a Home Without a Radon Test
We learned the hard way with our first house, so this time around we made sure to pay for proper radon testing during the home inspection. We hired a local radon testing company called Radon Ease (they only perform testing and do not remediate, which removes any incentive to find a problem). The inspector ran a multi-day monitor to measure average radon levels so we could make an informed decision before closing.
The results were sobering: readings exceeded the EPA action level of 4 pCi/L, meaning professional mitigation was needed. Because we tested during the inspection period, the sellers agreed to handle the remediation cost and even performed a follow-up test to confirm the issue was resolved. That saved us thousands of dollars and a lot of stress.

By contrast, our first house experience taught us why testing at inspection is so important. Back then we skipped the professional test option and relied on a $15 charcoal test purchased after closing. That cheaply purchased test revealed alarmingly high radon levels—comparable to smoking several packs of cigarettes a day—which forced us to pay for mitigation out of pocket. The system installed in our crawl space included a fan and piping routed through the roof to actively draw soil gas away from the home and vent it outside. It was intrusive and frustrating but effective in lowering indoor radon concentrations. For our full account of that remediation and the lessons learned, we documented the experience on our blog.


Why testing matters and practical tips
Radon is an invisible, odorless radioactive gas that can accumulate in homes and increase the risk of lung cancer. Because you can’t detect it without testing, the only reliable way to know whether your home is safe is to measure indoor radon levels. Here are practical steps and tips based on our experience:
- Test during the inspection period whenever possible. A certified, multi-day professional test provides reliable average readings you can use in negotiations. Testing at this stage can lead the seller to address high levels before closing.
- Choose an independent testing company. Companies that only test and do not perform mitigation have no financial incentive to find radon, which can build trust in the results.
- If a short-term kit shows high levels, follow up with a professional multi-day test to confirm the readings and determine the appropriate mitigation approach.
- Professional mitigation systems typically include a fan and piping to vent soil gas away from the home. Installations vary by house construction and foundation type, but the goal is the same: prevent radon from entering living spaces.
- If you missed testing during inspection, you can still order do-it-yourself test kits (charcoal or alpha track) at hardware stores, or hire a certified tester at any time. Continuous radon monitors provide the most detailed data over several days.
Our recent follow-up test after mitigation showed very low levels—around 0.5 pCi/L—lower than typical outdoor air readings. That was a huge relief and confirmed the mitigation system was working well.
Local risk and next steps
Some regions, including parts of Virginia, are known for higher radon potential. Consult the EPA radon potential map or local health department resources to see whether your county is identified as higher risk. Even in areas with lower risk, individual houses can still have elevated levels, so testing every home is the safest course.
If you have children, pets, or family members who spend a lot of time at home, testing becomes even more important. A relatively small upfront investment in proper testing can avoid the much larger expense and disruption of late remediation, and it protects long-term health.
Have you dealt with elevated radon in a home? Share your experience—we’d love to commiserate and exchange tips.
Map image courtesy of the EPA.
Psst—We also did another nursery feature over on BabyCenter. See that charming baby bedroom on their blog.








