Paint Your Front Door Like a Pro: Step-by-Step Guide
Front Door Makeover: How We Removed a Storm Door and Painted a Six-Panel Wood Door Bright Yellow
We followed through on our plan and completed the full front door transformation. Below is a concise, step-by-step account of what we did, why we did it, and how the final result turned out.

Here’s the starting point: an old maroon storm door that created three problems — the grid pattern didn’t align with the six-paneled door behind it, the door frequently jammed, and it didn’t latch properly so it would bang in windy weather.

We rarely used the storm door, so we decided to remove it entirely. Removing the storm door revealed an attractive six-paneled solid wood door that was just waiting for a refresh.

After taking off the storm door hardware, we spackled the mounting holes and touched up the surrounding trim with exterior paint the previous owners had left in the basement.

Next came the fun part: choosing a paint color. We held up a wide range of swatches — plum, turquoise, navy, lime green and more — but kept returning to cheerful yellow. We narrowed it down to four similar shades and evaluated them in morning sun, afternoon shade, and under the porch light at night. Our final choice was Full Sun EB1-1 from Valspar’s Eddie Bauer Home collection.

We also decided to restore the original door knocker, which had become rusted and peeling. It was carefully removed and set aside for refurbishment so it could be reinstalled on the finished door.

With hardware removed, we sanded and smoothed the surrounding paint, and removed a rusted brass kick plate at the bottom of the door to create a clean, uninterrupted look. We also removed the door handle and lock so they could be refurbished while the painting was in progress.


For durability and convenience we asked a paint specialist which exterior product would work best. They recommended Valspar Duramax, which includes primer and is formulated for exterior exposure. We had the store color-match our Full Sun chip and bought a quart in semi-gloss.
Before painting, we used a liquid deglosser (Next Liquid Deglosser by Crown) to remove oils and residues that can interfere with paint adhesion. Deglossing is a good alternative to extensive sanding when surfaces are otherwise smooth; however, any rough or patched areas should be sanded first to ensure a smooth finish.
We applied the first coat using a small foam roller to minimize brush marks and a 2″ angled brush to get into the door’s panel frames. One thin coat showed promising coverage over the deep maroon, but we followed up with additional coats for full, even coverage.

After four thin, even coats of the exterior primer/paint in semi-gloss, the door had a smooth, glossy finish. Applying thin coats and allowing each to dry completely between applications was the key to avoiding visible brush strokes.

The color brightened and refreshed the whole entryway, and the door looks great from both outside and inside.

The hardware was refurbished and reattached once the paint had set. We avoided closing the door immediately after painting to prevent sticking, allowing it to fully cure by evening before closing it completely.




Removing the old maroon storm door made a big difference — the bright yellow door now pops against the brick and cream siding, and the porch feels much happier.


Summary of the process:
- Tested color swatches on the door at different times of day to choose the best shade.
- Removed the storm door and repaired holes in the door surround with spackle and sanding.
- Removed and sanded hardware areas and the rusted kick plate for a clean look.
- Deglossed the entire door and ensured patched areas were smooth before painting.
- Refurbished hardware while the door was being painted.
- Applied four thin, even coats of exterior primer + paint in semi-gloss for a durable, glossy finish.
- Reattached hardware when the paint was sufficiently dry and allowed the door to cure before repeated use.
Budget note: one quart of Valspar Duramax in semi-gloss cost about $15. If you need spackle and a deglosser, add roughly $4 each, but a quart is usually enough to cover both sides of a front door with leftover paint to spare.
Update: Several readers asked for wider curb shots, so here are a couple. Keep in mind the surrounding landscaping and siding may change in future updates — this is just one step in a series of exterior improvements.

…especially the large row of bushes that partially hides the door from certain angles.

Wouldn’t it be great to wave your hand and move those bushes instantly? For now, we’ll stick with pruning and planning future exterior projects.








