Refinish a Wood Table: DIY Steps to Restore It
Who wants to refinish a table? If that’s you, great — we refinished two dining tables using elbow grease, no chemical strippers, and a lot of sanding. It’s proof that an old thrifted or hand-me-down piece can be transformed without a huge budget or special products.

Why Refinish a Table?
We needed two dining tables for our duplex rental because each unit has its own dining area. One table was a hand-me-down Crate & Barrel piece that had a scratched cherry finish. The other was my sister’s old farmhouse table — solid, casual, and the perfect size, but visibly worn from years of use.

Both were solid wood, which made them ideal candidates for refinishing. If a table has laminate or veneer, the approach changes, but solid wood can usually handle sanding and restaining well. Since both tables were already beat up, we weren’t nervous about taking a sander to them.

Tools to Refinish a Table
We avoided harsh chemicals and used these basic tools and supplies to refinish both tables:
- Electric sander — either a corded random orbital or a battery-operated palm sander
- Coarse 80-grit and medium/fine 120-grit sandpaper
- Paper towels or tack cloth to remove dust
- Shop vacuum or leaf blower for heavier dust removal
- Stain-grade paintbrushes
- Rags for wiping stain
- Wood stains of your choosing (we used a medium brown and a cool gray)
- Water-based polyurethane or sealer (we used a thicker “Triple Thick” water-based sealer)
- Mask and nitrile gloves for protection
The safety items keep you a bit cleaner while working, and the rest are standard supplies for sanding, staining, and sealing wood.
Step 1: Sand a Test Spot
We started cautiously by removing and sanding the top of one table leg to see what lay beneath the old stain. That test spot revealed the underlying wood color and grain and gave us confidence to proceed — if it had looked terrible, no one would have seen the failed attempt.

The test worked beautifully, so we moved on to sanding the rest of each table.
Step 2: Sand Off the Old Finish
We began sanding all surfaces using 80-grit sandpaper, working in small sections and following the wood grain. A battery-operated sander can do the job, but it’s slower. After some initial work, we upgraded to a corded random orbital sander, which sped up the process and produced a cleaner result.

The orbital sander removed the factory finish more efficiently and revealed more of the natural wood grain than we expected.
Step 3: Smooth Out Scratches and Dents
The heavier-duty sander was particularly helpful removing stubborn scratches and smoothing gouges on the farmhouse table. Working carefully with the grain allowed us to reduce deep scratches and even out the surface before moving on.

Sanding both tables took about two to three hours total, especially considering the legs and aprons. The faster sander made that time much more tolerable and produced better results.
Step 4: Finish Sanding with Fine Grit Paper
After removing the old finish, give the surfaces a final pass with 120-grit sandpaper to smooth everything out. This is especially important on the tabletop so the stain and sealer apply evenly.

Step 5: Clean Off Your Sanding Dust
Remove all sanding dust before staining. Outdoors, a leaf blower quickly clears loose dust; indoors, a shop vacuum helps. Follow up with a tack cloth or a damp paper towel to pick up any remaining sawdust for a clean surface.
Step 6: Apply Your Stain and Sealer
We moved the tables into the duplex and stained them in place so we could judge the color in the actual room lighting. For one table we chose to keep the raw look and applied clear water-based sealer. The sealer deepened the wood slightly while preserving grain and texture. We applied one coat of sealer, followed by a second coat of a thicker, more protective water-based finish for durability and a satin sheen.

That clear-sealed result retained the natural wood character and fit beautifully in the room, complementing nearby wood elements and the overall palette.

Seeing the refinished table in the room confirmed our choice — the lighter, natural finish warmed the space without hiding the grain.

Step 7: Don’t Be Afraid to Layer Stains
On the Crate & Barrel table the clear sealer brought out red undertones we didn’t want, so we layered stains to neutralize and refine the color. We applied a medium-brown stain first, then followed with a very light wipe-on coat of a gray stain to cool the tone. Wiping the gray stain off quickly prevented it from soaking in too deeply and allowed the two layers to blend, preserving wood variation while shifting the overall hue.

Once the layered stains dried, we applied two coats of water-based sealer for protection. The result kept visible wood grain and produced a cohesive, updated look that fits the space.

The transformation was dramatic: a red, worn finish became a refined, cooler-toned table that complements the dining area and lighting above.

On the other side of the duplex we paired the clear-sealed farmhouse table with bright dining chairs and a mixed-finish globe light. The result blends new and old elements and gives each dining space its own character.

Between buying one affordable table from family, a sander upgrade, a few cans of stain, and some sealer, we refreshed two tables for far less than the cost of new ones. The refinishing process gave us durable, attractive pieces that look custom-made for each space.
Alternate: How to Paint Furniture
If refinishing doesn’t give you the look you want, painting is a great alternative for wood, veneer, or laminate furniture. Painting can completely change the style and often requires fewer tools than sanding and restaining. Consider painting tutorials if you want a solid color or a different finish.
For more furniture makeovers and DIY projects, explore furniture upgrade and refinishing ideas to find a method that fits your piece and your preferred finish.
*This post originally referenced common supplies and techniques for refinishing and sealing wood furniture.*








