Style IKEA Curtains Like a Designer
How We Solved Our Naked Living Room Windows on a Budget
When we planned curtains for the living room, I calculated that we needed about 20 yards of fabric—roughly five yards per window to make two floor-length panels that could hang high and wide. That much fabric felt overwhelming: 60 feet of material, and even at a bargain price it would be a serious expense after adding rods and hardware. So the sliding doors sat bare for months while we weighed options.

We initially imagined bold, colorful curtains to contrast all the gray in the room—soft gray walls, darker-gray beams, and a dark gray sofa. But after trying out a bright rug, colorful placeholder art, and punchy pillows, the room already had plenty of pop. The bright accessories made us rethink the curtains: we wanted something quieter—tone-on-tone, textured, and affordable.

Months earlier we’d picked up a few packs of lightly patterned leafy curtains from Ikea on sale. Each pack contained two panels and the sale price worked out to about $15 per panel. We hung the four panels we owned on a pair of sliding doors and liked the soft, leafy texture—they felt sophisticated without competing with the rest of the room.

We planned to pick up two more packs to finish the room, but when John’s mom went to the store she discovered the curtains had been discontinued. That was disappointing, and a quick search turned up expensive used sets online, so we had to get creative.
At first I was bummed and ate a few cookies to cope. Then a practical idea hit: the panels we already had looked too wide when hung open. Since we rarely close our curtains and prioritize maximum light, fullness didn’t matter—what mattered was the pattern and the fabric’s soft translucence. I tested the idea by unclipping a panel, folding it in half, re-hanging it on the rings, and stepping back. The folded width looked just right.

So I made the cut: I split each panel down the middle to create two equal panels from one. Because they had been folded in the original packaging, the center fold was easy to follow with scissors, resulting in matched widths. Then I ironed and hemmed the new side edges using a simple iron-and-sew technique (no pins required). Hemming the sides for all eight panels took about twenty minutes once they were prepped with the iron.

After stitching a narrow side hem that matched Ikea’s factory finish, I washed the panels on cold and tumble-dried low to pre-shrink them before finishing the bottoms. I hung the damp panels on oil-rubbed bronze rods we installed high and wide—three inches below the crown molding so the rods aligned, and about 14 inches wider than the trim for most openings. The smaller slider to the balcony had less wall space, so those rods were positioned about 8 inches wider than the trim.

To set the final length, I clipped the panels to the rings and pinned the bottoms so each panel just grazed the floor. For a neat, substantial finish I used iron-on hem tape to create a wide 3–4″ base hem. That gave a clean, uninterrupted look from the front without visible stitching. I applied the hem tape while the curtains hung, then removed the pins and smoothed the hems.

We avoided long, puddled hems because three of the sliding doors get regular use and we didn’t want fabric dragging underfoot. The result is soft, almost-sheer curtains that let light filter in while displaying the subtle leafy pattern.

Styling-wise, these quieter curtains balance the room’s other elements: the chunky, rustic wood console, the round mirror, the dark sofa, and the gray beams. Pops of color come from the green shag rug and a few bright accent pillows that we shuffle around the house. Fresh hydrangeas added a touch of blue, and our cat couldn’t resist posing for photos.

Cost-wise, transforming four purchased panels into eight finished ones made this a very affordable solution. We spent $58 on two two-packs and split them to create eight panels—about $7.25 per finished panel. Even factoring in the rods and a little sewing, the DIY route saved a lot compared to buying new wide-width fabric or expensive ready-made drapes.

This project taught us a few useful lessons: test folded widths before cutting, follow existing factory folds for accurate splitting, pre-shrink fabric before finishing hems, and don’t be afraid to adapt a find that initially seems imperfect. The room now feels cozier and more pulled together—soft, textured curtains that invite you to flop down on the sofa and relax.

If you’re facing a similar curtain dilemma—discontinued panels, too-wide factory fullness, or a tight budget—consider whether splitting wide panels could work for your space. For rooms where privacy isn’t critical and you want light and texture, it can be a quick, economical fix that looks polished and intentional.









