How to Install a Rain Barrel for Your Garden
Happy Earth Day, everyone! We’re also celebrating a family birthday today—Sherry’s little brother, known affectionately as Almost-Doctor-Dan—so it felt like the perfect day to share a little eco-friendly weekend adventure about finding and installing a rain barrel.

We’ve been planning to replace the rain barrel we made at our first house ever since we sold it, and we finally got a lucky break. While driving one afternoon, we noticed a sign advertising barrels and pulled over to take a look. The roadside stand turned out to be Carolina Mike’s Produce Stand. Although the stand wasn’t yet stocked with produce, Mike was friendly and had several used food-grade barrels for sale.

Mike had tall black barrels that had once held jalapenos and shorter blue barrels that had once held soy sauce. Both were 55-gallon containers, priced at $60 and $40 respectively. Since the lower-priced blue barrel matched the cost we paid previously to build a barrel in a local workshop, we chose the convenient ready-made option and tossed one into the backseat after making a quick trip home to drop off the baby and make room.

The barrel sat in the carport for about a week while we debated the best location. We finally decided to place it near our small fenced garden behind the carport, next to the sunroom. That spot is convenient for watering the beds around the perimeter of the future patio we plan to build, and it’s right next to a downspout that can easily funnel roof runoff into the barrel.

This area is currently more of a doggie pit stop than a garden, but we’re planning to remove the liriope and replace the thin brick pathway with a larger stone patio accessible from the sliding door in the living room. Until then, a rain barrel will collect water for the plant beds we’ll leave around the edge of the new patio. The downspout next to the low brick wall was the obvious place to connect.

Before committing, I checked that a watering can could sit under the barrel’s spigot without needing to elevate the barrel on blocks. If we had built the barrel from scratch, we might have placed the spigot lower to use every last drop, but our previous barrel performed well with a similar spigot position and didn’t develop odors or algae problems over years of use. If necessary, the barrel can always be tipped forward to fully drain it.

Once the spot was leveled and the downspout location determined, I used a small hacksaw to trim the downspout so it would feed into the barrel. The process was quick: trim the downspout, position the curved spout piece, slide the barrel into place beneath it, and secure things so water runs directly into the barrel during rain.

We’re waiting on the next significant rain to see Ol’ Blue (our new bright blue barrel) at work, but it already feels good to be back in the rain-barrel club. Capturing roof runoff saves potable water, reduces stormwater runoff, and keeps water on-site for watering gardens and beds—simple steps that make a meaningful difference for a household garden and for local stormwater management.

The barrel’s bright color stands out more than we’d like, so when we begin landscaping and building the patio we may paint it a brick-red or another neutral tone to help it blend into the surroundings, similar to what we’ve done before with utility boxes and a propane tank. We’ll probably also plant a few shrubs or perennials around the base to further screen it while still allowing access to the spigot.

So, who else has joined—or rejoined—the rain barrel club? If you’re planning a patio or some garden upgrades this season, installing a rain barrel is an easy, low-cost step toward sustainable landscaping and efficient irrigation. Between the future patio, some planting, and a little camouflage work, this bright blue barrel will soon feel right at home.

Now, if you’ll excuse me, I have some liriope to dig up—Sherry’s been reminding me daily—and a small patio to plan. Happy Earth Day, and happy gardening!








