Objectales

Popular

How to Build a Backyard Fence: Step-by-Step Guide

featured 36011

As some of you noticed in Monday’s party recap, our patio had one more addition on Saturday besides balloons and a swarm of kids: a new 6′ privacy fence. It was installed in the narrow window between finishing the patio and hosting Clara’s birthday, and I’m only getting to write about it now.

img 36011 1

Here’s the short version of how it happened. Throughout the patio project Sherry kept insisting we upgrade the fence on the side that faces our neighbor before the party. Her main goal was simple: keep that big blue car that’s usually parked next door out of our photos. I agreed with the idea, but with sore muscles and a deadline breathing down my neck, my first reaction was a grumpy “no way.” In the end, of course, Sherry got her way.

img 36011 2

When the patio work wrapped up three days before the party, I rented a truck on Tuesday and picked up supplies: four pre-made 8′ x 6′ fence panels, five posts, and miscellaneous hardware. The plan was to replace the existing roughly 4-foot wire mesh fence—held up by rotten wood posts and a single steel rod—with a taller, less see-through 6-foot privacy fence.

img 36011 3

First step: remove the old fence. Fortunately the steel post and the wooden posts were deteriorated, and my wire cutters made quick work of the mesh.

img 36011 4

Next came careful layout. Accurate post spacing was crucial because the pre-made panels need posts that are exactly 8 feet apart for the panels to fit without gaps. I marked each post location with wood stakes and triple-checked the measurements before digging.

img 36011 6

Digging post holes is never fun. The clay soil was dense, and after getting about 20 inches deep I decided to trim a few inches off the posts rather than keep fighting the ground. That left each post extending about 6 feet above grade. Purists might frown at less-than-24-inch deep holes, but with gravel, compact soil, and concrete, the posts ended up solid and stable.

img 36011 7

I added an inch or two of gravel to each hole for drainage, set the posts, and surrounded them with Quikrete’s no-mix concrete—just the water you add kind. Tip: keep the concrete bags dry before use; I stored them in the trunk to avoid rain and humidity, which would have ruined unopened bags.

img 36011 8

To keep posts plumb while the concrete cured, I screwed together temporary bracing from scrap wood and used a post level to ensure each post was perfectly vertical. The post level turned out to be the best $5 investment of the project; it made quick work of keeping the posts true.

img 36011 9

I also ran two guide strings—one to align the front face of the fence and another to mark the top of the posts—so everything would be straight and even across the run.

img 36011 10

By the end of the workday I had four posts set (I actually didn’t need the fifth post because one from the old fence fit into the run). After the concrete cured and the holes were backfilled, I moved on to attaching the panels. Lifting the panels was cumbersome, but one at a time I positioned them, leveled where needed, and secured them with wood screws. Because the yard slopes slightly, I did a little trimming and leveling at the bottom to make the top line look consistent.

img 36011 11

The panels lined up beautifully, including the last one that needed trimming. The yard is 27 feet along that side, so I used three full 8-foot panels plus about 3 feet from the fourth. Cutting the horizontal rails with a handsaw was the final bit of effort that drained what remained of my energy.

img 36011 14

The result was a virtually seamless 27-foot stretch of privacy fencing, installed in time for Clara’s party and doing its job by hiding the neighbor’s car from party photos.

img 36011 15

We’ll stain the new panels along with the existing shorter panel in front so the whole run looks finished and cohesive. We chose this panel style to match the existing panel behind our recycling bin and to maximize privacy—since the neighbor’s yard slopes up, the full 6-foot height helps a lot. Someday we may raise the shorter front panel to match, but plantings in front of it already obscure it from the street.

img 36011 16

There’s a tiny gap where the new panels meet the existing fence; a small 1″ x 1″ x 6′ piece of trim will hide that easily when we have a spare moment.

I’m not great at keeping receipts, but here’s a budget estimate based on my credit card charges and what I remember:

  • Quikrete concrete mix (8 bags): $30
  • Truck rental: $19
  • Fence panels (4) and posts (4): $171
  • Post level: $5
  • Hole digger: borrowed
  • Screws, stakes, line level, rope: already owned
  • TOTAL: $225 for a 27-foot long, 6-foot tall privacy fence*

* Our actual total ended up closer to $213 after applying a 5% store card discount. This isn’t an endorsement—just what worked for us.

img 36011 17

What a difference a privacy fence can make:

img 36011 18

My body has finally recovered from a couple of weeks of heavy manual labor, and while I’m in no hurry to sign up for another major lifting session, it feels good to have this project checked off the list. The fence gave our patio immediate privacy and helped our daughter’s birthday party photos look a lot nicer—mission accomplished.