How to Sew Curtain Panels: Step-by-Step Sewing Guide
Our recent road trip to visit Katie and tour her beautiful home reignited our DIY momentum. We often work in bursts—making steady progress for a while, then taking a break—so stepping away for a few days somehow made us excited to jump back into projects. The morning after our long drive I dove into photos and emails, wrote a couple of posts, and by dinner time I had enough energy left to make dining room curtains. They turned out to be one of my favorite additions to the house.

We’re fans of a few signature elements in our home—like the hallway frame gallery, the oversized bedroom light fixture, and our big gray sectional—but these curtains might top the list. Despite how cherished they feel, they took just about an hour and a half to two hours to complete. The jumpstart came from seeing that inspiring house and deciding to get back to work.

I found a deeply discounted Robert Allen upholstery fabric at a local outlet. It was originally priced much higher, but because of a minor irregular stripe along one edge it was marked down to a fraction of the original cost. I planned two panels roughly 90 inches long to flank the large picture window in the dining room, and five yards of fabric gave me two panels at a very reasonable cost compared to retail pricing.

Because we don’t usually open and close curtains for privacy—blinds or shades handle that when necessary—we prefer to hang curtains high and wide to create height and let light pour in. That also meant width wasn’t a constraint for these panels; I used the full fabric width off the bolt (about 57 inches), trimming only a few inches to work around the flaw. The trimmed edge would be hidden by a double-folded hem, so the defect wasn’t an issue.

I cut each panel on the floor using a 5 x 8 rug as a straight edge. Lining up the fabric with the rug corners made it easy to get a square, even cut. Each panel was cut to 90 inches before hems, which would leave them just shy of 90 inches after hemming; I planned to add ring clips so the finished length would hang at my desired 90 inches.

To ensure the panels wouldn’t shrink later, I washed and dried both pieces before finishing the hems. Prewashing is always a good idea for home-sewn projects, though in this case I was confident the fabric quantity was correct so the order of cutting and washing didn’t affect the final size. I removed them promptly from the dryer to minimize wrinkles.
For hemming I debated between my usual iron-on hem tape and trying my new sewing machine. I decided to sew, but still used the iron to press a neat half-inch fold along each edge. That gave me a guide line and helped the fabric stay flat while I sewed. Instead of pinning, I folded the pressed edge over one more time and stitched it down, creating a clean, enclosed hem that hides raw edges and makes the back look finished too.

The ironing-then-folding-then-sewing method worked well on both the short and long sides of the panels. The extra fold completely concealed the irregular stripe and left both front and back edges tidy. Below you can see the finished back of a corner after hemming.

To hang the curtains I used oil-rubbed bronze ring clips and a long oil-rubbed bronze rod. Ring clips make installation fast because there’s no need to sew rod pockets. I needed a 144-inch rod to span the window and allow generous coverage on each side. We hung the rod high and wide—about 19 inches outside the trim on each side—so the panels drape in front of the wall rather than blocking the side windows, creating the illusion of extra height and width.

We hang curtains the old-fashioned way: one of us holds the rod while the other steps back to check how the panels hit the floor, adjusting height until it looks just right. It’s a little unscientific but produces great results—those final, by-eye tweaks are worth the fuss. The panels end up grazing the floor slightly for a polished, tailored look.

The fabric has a mostly blue base with touches of green, chartreuse, white, and brown. From a distance the panels read as a rich teal-blue that complements the deeper tones elsewhere in the room, like the dark dining table and built-in cabinetry. Those small chartreuse accents in the fabric even tie back to the yellow-green knobs on the built-ins—little coincidences that make the room feel cohesive.

Adding these curtains changed the dining room dramatically. They bring color, pattern, and scale to the space and instantly made it feel finished. I even set the table for no reason other than the pleasure of seeing how the new curtains transform the room—bringing out colors in dishes, a runner, and clipped branches.

Looking back at photos from when we first toured the house, it’s funny how much the space has evolved in a few months. We originally saw rooms as flexible canvases—furniture, paint, and even room function can be changed to suit how you live. For us, that meant converting a formal living room into a dining area that better fits our family and entertaining needs.


We still have plans—widening the doorway into the kitchen to mirror the picture window and adding a large chandelier above the table will further enhance flow and function. But for now, the curtains are a small project that made a surprisingly big impact.

If sewing isn’t your thing, a no-sew approach with iron-on hem tape is a great alternative for making curtains quickly and affordably. Either way, hanging curtains high and wide is an easy, high-impact update that can change the look and feel of a room overnight.








