DIY Ribbon Chandelier: Step-by-Step Tutorial
I’d been admiring ribbon chandeliers in baby stores, catalogs, magazines, and on Pinterest, so I decided to make one for Clara’s closet. The closet is large enough to become a small reading nook as she grows (I imagine a cozy beanbag and a stack of picture books), and although it already had its own light, it was the kind of bare-bulb fixture you pull a string to operate. A cheerful ribbon chandelier seemed like the perfect, inexpensive way to brighten the space and give the closet a softer, more finished look.

I spent just $2 on a 10″ embroidery hoop from Ben Franklin and used white spray paint plus a box of ribbons I already had. I save scraps and leftover ribbons from gifts, so most of the materials were on hand, which made this an easy, budget-friendly DIY chandelier project.

To start, I spray-painted the metal hoop white and let it dry on a piece of cardboard outside. While it dried I sorted through ribbon scraps and chose the colors and patterns I wanted to use. I flipped the hoop with a stick to paint the other side and left it to finish drying.

Back inside, I cut ribbon lengths of roughly 16″ each. I wasn’t strict about exact measurements—some pieces were a little shorter if I could get two lengths from one ribbon—but that casual variety actually added to the charm. Once the ribbons were cut, I glued them around the painted hoop with a hot glue gun, folding each ribbon over the top of the hoop and securing it to itself on the inside. I left a small gap between each ribbon so they wouldn’t bunch up, and worked my way around until the hoop was evenly covered.

Since Clara’s closet light was a bare bulb, I swapped it for a CFL before hanging the chandelier (CFLs run cooler and are safer for decorative elements). The fixture had two little hooks on either side that were handy for suspending the hoop. I considered fishing line, but white sewing thread worked perfectly for this purpose.

I tied four loops of white thread at even intervals around the hoop and hung those loops over the two ceiling hooks so the hoop would be supported from four points. That setup stabilized the embroidery hoop and kept the ribbons hanging neatly around the bulb.

Once it was hung, the ribbon chandelier added a playful, textured element to Clara’s closet. The ribbons are intentionally varied in length, with some ends cut straight, some angled, and some dove-tailed so the bottom edge looks relaxed and organic rather than perfectly uniform. I skipped ironing the ribbons before gluing them, which gives the piece a slightly wavy, lived-in look—think soft, tousled hair—and I can always take it down to press if I want a neater finish later.

Clara loved it the moment she saw it after her nap. Little details—like a pink ribbon printed with bunnies that came from an old Easter basket project—bring back small memories and personalize the space. The ribbon chandelier peeks out from behind the closet curtain like a cluster of bright dresses, so it’s subtle from across the room but delightful up close.



The whole project cost just $2 plus materials I already had, and now the ceramic animals that live on the top shelf of Clara’s closet have a cheerful canopy above them. (We moved the breakables up out of toddler reach, so they’re safe and also part of the little display.)


If you’re thinking about a DIY ribbon chandelier for a nursery, closet, or playroom, this simple approach using an embroidery hoop and recycled ribbons is low-cost and customizable. Just be mindful of safety: keep all fabric and ribbon well away from the bulb so there’s no contact, use lower-heat bulbs like CFLs or LEDs, and ensure adequate ventilation around the fixture. In some areas, exposed bulbs in closets aren’t up to code and a glass dome may be required—if that’s the case, you can still dress up the fixture outside the dome or choose a safer, enclosed option.
Safety note: Many lampshades are made from fabric or paper, and ribbon decorations can be safe when properly positioned. Make sure the ribbons don’t touch the bulb and that there’s enough clearance for heat to dissipate. Our 10″ hoop left plenty of space, and switching to a cooler bulb helped reduce any risk.








