Objectales

Popular

DIY Chandelier Makeover with Paint and a New Shade

featured 40533

DIY Chandelier Update: Indigo Blue Chandelier with Drum Shade for the Office

We gave our old brass chandelier a fresh, modern look for our office by repainting it a deep indigo and fitting a large white drum shade around it. The change made the fixture feel less formal, raised it to a more practical height, and softened the light for a more even, pleasant glow. Here’s how we did it and what worked.

img 40533 1

Originally the room was our formal dining room, so the original chandelier had a pretty traditional, fussy look that didn’t suit our office. It also hung a little too low for everyday use, which meant regular bumping into it while moving around the room.

img 40533 2

We decided to modernize the silhouette by removing the oversized bottom finial, shortening the hanging chain, painting the metal an indigo satin, and fitting a 24″ drum shade. The shade would diffuse light more evenly and update the finished look without having to buy an entirely new fixture.

img 40533 3

We found a jumbo drum shade at a local outlet; it measured exactly 24″ wide and was marked down. After pointing out a couple of small, nearly invisible dents to the salesperson we were able to negotiate the price from $51 to $39, which made the project even more economical.

img 40533 5

To avoid an awkward-looking ball finial poking out beneath the drum, we unscrewed and removed it. The long rod that had supported the finial came off easily and revealed that the piece was hollow, so removing it was a quick win for cleaner proportions.

img 40533 6

The initial plan to mount the shade on the bottom didn’t quite work because the crossbars of the shade were too visually prominent and conflicted with the chandelier’s curves. Hanging the shade from the top looked better, but the shade’s top attachment was too narrow to slide over the fixture. That meant we needed a custom attachment solution.

img 40533 9

We removed the notched metal ring from the shade. Half came off easily; the other half needed some determined cutting. To avoid warping the shade, we used a hacksaw to carefully cut away the remaining tabs. This took patience but preserved the shade’s shape.

img 40533 12

To stabilize the shade and attach it to the chandelier, we improvised with spare 3″ binder rings. We sandwiched the shade’s four supporting rods between two binder rings and wired them together with craft wire to secure the assembly. The solution is hidden from view once the shade is in place and proved sturdy enough.

img 40533 15

Next, we shortened the chain so the fixture sat higher and no longer interfered with daily movement under the light. We determined the ideal height by walking under the hanging fixture and removing links until it felt right, then trimming the wiring to match. Make sure the power is off and follow safe re-wiring procedures or consult an electrician if you’re unsure.

img 40533 16

For color, we chose an indigo satin spray paint that gave the brass a classic yet contemporary finish. We primed first, hung the chandelier in a well-ventilated area, and sprayed multiple thin coats for even coverage. We also stuffed paper towels in the sockets to keep paint out of the bulb fittings.

img 40533 17

After reinstalling the chandelier—sliding the shaded assembly down the chain so the binder rings sit on the fixture’s center flute—we reattached the wiring to the ceiling and tested the fixture. The indigo finish is richer in person than photos show, and the shade creates a pleasant, diffused light that eliminates harsh shadows.

img 40533 22

The drum also produces a subtle kaleidoscope shadow pattern on the ceiling when lit, and the larger fixture size keeps the enormous desk in the room from feeling dwarfed. We swapped traditional flame-tip bulbs for round globe bulbs for a cleaner, more modern look; LED globe chandelier bulbs may be a better energy-saving option as they become more common.

img 40533 28

From the floor, the fixture looks polished and understated—exactly the balance we wanted so it wouldn’t compete with a future dining-room chandelier. Even better, the final bottom height is 78″ from the floor, so no more head bumps.

img 40533 25

Project cost breakdown:

  • Chandelier: $0 (already owned; similar fixtures can be found inexpensively at thrift stores or yard sales)
  • 24″ Drum Shade: $39 (outlet purchase)
  • Binder rings & wire: $0 (on hand; estimated $4 if purchased)
  • Tinted spray primer: $0 (on hand; about $7.50 retail)
  • Indigo spray paint: $3 (small can purchased)
  • Globe light bulbs: $9
  • Total: $51

img 40533 30

This update kept costs low while delivering a big visual improvement. If you’re thinking about updating an existing fixture, consider changing the finish, adding a drum shade for softer light, and adjusting the hanging height. Small changes can make a dated chandelier feel fresh and more suited to everyday use.

We’d love to hear about your own fixture updates—did you repaint, rewire, or repurpose a shade? Share tips, hurdles, or photos if you’ve tackled a similar project.