Kitchen Renovation Checklist: What to Do Next
Kitchen Update: Electrical Work, Progress Photos, and Next Steps
We promised to share every step of our kitchen renovation—just like we did more than four years ago with our first full makeover—so here’s a short update focused on the electrical work we recently had done. We’re comfortable with many DIY tasks like painting, drywall, demo, and basic furniture building, and we’ve even tried a little plumbing. But when it comes to anything potentially dangerous in an older house—especially electrical work that could lead to major problems—we call in pros. This time we hired a two-person electrician team, recommended by friends, to make several key changes that will allow our new kitchen layout to function properly.
- Located and resolved a mystery wire above the pantry: it turned out to be the dedicated fridge circuit that had been routed oddly—out of the wall and back in again for grounding.
- Rerouted that wire behind the wall and repurposed it as the outlet for a built-in microwave that will live next to the pantry.
- Converted a hardwired connection behind the cooktop into a standard plug for the new stove, which simplifies appliance installation and safety.
- Safely terminated the hardwired feed that used to power the old wall oven.
- Added a dedicated circuit and outlet for the fridge’s new location across the room so we no longer need an extension cord.
The main takeaway: renovation often gets messier before it gets better. After moving the fridge and pantry around for the new layout, the room looked pretty chaotic. Here are photos of the progress before the electricians arrived (we had already moved the counter-depth fridge and the range into place but were missing some countertop sections):

We also took a few close shots of the stove and fridge in place during that phase:


And here are images from while the electricians were working—walls opened up, wires exposed, and the space temporarily out of commission:



Once the electricians finished, sealed the wall openings, and everything got pushed back into place, the kitchen looked and functioned much better. The oven and stove worked, the microwave will have a real plug for its built-in cabinet, the odd ceiling wire above the pantry was gone, the old wall oven wiring was safely capped, and the fridge ran without an extension cord. Progress!


The electricians charged roughly $80 an hour for two technicians (the first hour was $87, subsequent hours were $70), which felt reasonable for the scope and the speed of the work. For anyone local who asked, we used S.J. Ryan Electric—honest folks and fair pricing. We weren’t sponsored to mention them; we simply like to recommend professionals who do good work.
Because the kitchen’s wiring had already been updated by previous owners (GFCI protection in place, etc.), the job was relatively straightforward. Working in a ranch home makes routing wires easier because there’s attic access rather than having to chase things through a second floor. We did run into one access challenge with the mystery wire above the old fridge: that attic area was tight because of the roof pitch from the original structure before the addition. That’s why one small section of the wall above the pantry needed to be opened to solve the problem.
What’s next on our ongoing kitchen list? We’re keeping this as a running plan that changes as we go, but current items include:
- Build a built-in surround for the fridge so the bulky black sides aren’t visible
- Build and wire a built-in microwave cabinet next to the pantry
- Demo the old backsplash and install a new one
- Install a new dishwasher and sell the old one
- Recess the new stove so it sits flush with cabinets
- Create a peninsula using custom or ready-made cabinetry
- Remove remaining old countertops and install new surfaces
- Open an 8-foot opening between the kitchen and dining room (contractor-assisted)
- Choose and install a vent hood above the stove
- Remove upper cabinets along the stove wall and extend counter-to-ceiling backsplash
- Add floating shelves to the accent wall after tile is installed for cleaner cuts and a seamless look
- Match new cabinet doors to the existing style and install new hinges and hardware
- Redesign lighting: remove fluorescent fixtures and fan, add recessed work lights and pendant lighting over the peninsula
- Install cork flooring, add crown molding to cabinet tops, prime and paint cabinet faces
- Create a cozy fireplace corner with seating and built-in shelving
Breaking a large renovation into smaller tasks keeps us sane. We still get overwhelmed sometimes—making the list above was one of those moments—but tackling one small project at a time allows flexibility and better decisions as we move forward. Slow and steady wins the race: we’ll keep inching toward a finished kitchen we’ll enjoy for years.
Did you work on a home project this weekend? Any electrical updates or long to-do lists happening at your house? We seem to always start major projects around the holidays—maybe the renovation dust feels like seasonal snow. Despite the chaos, it’s fun to watch everything come together little by little.
Note: We were invited to speak at a DIY and blogging conference this coming June and are excited (and a bit nervous) to meet other creators and readers there.








