Trim Cabinet Doors for a Perfect Fit
From the moment we decided to add secondhand cabinets to our kitchen, we knew matching the missing doors would be one of the bigger challenges. Even though only five doors were missing, getting them to blend with the rest of the cabinets was important for a seamless, finished look. Here are the five doorless cabinets we had to solve:

We considered several approaches to achieve a unified kitchen appearance. In order of cost (most to least), our options were:
- Replace all doors and drawer fronts across the entire kitchen
- Order custom replacement doors only for the cabinets missing them
- Repurpose and resize leftover doors from the cabinets we’d removed
We explored the full replacement option first because we love a clean shaker-style door. It looks great in remodels, but once we totaled the estimates from a few suppliers and door manufacturers, the price soared into the $2,000–$3,000 range. That made us shift focus to less expensive choices.

Custom-made replacement doors were a better price, but our cabinets are a very specific style: solid, well-built custom oak with a framed box and partial inset doors. That inset detail—where part of the door sits within the frame—provides an exceptional fit, but it also means off-the-shelf doors won’t match. After checking with a few suppliers and the original manufacturer, we learned that finding exact partial-inset doors with the same profile would be difficult.

The cabinet maker connected us with a local craftsman who quoted around $800 to make new matching doors for the missing five. That wasn’t unreasonable, but since we had several extra doors from the cabinets we had removed, we decided to try repurposing them first. If that failed, we could still order the custom replacements as a backup.

All of the spare doors were larger than the openings they needed to fill, so they had to be trimmed. Because of the raised border, raised inner panel, and inset edge, trimming needed to be done from the middle of each door rather than simply shaving the edges. To get precise, straight cuts I used a table saw—our go-to for accurate rip cuts.

After two careful cuts I removed a center section and ended up with two halves that combined into the perfect length for the doors we needed.

To join the halves I made pocket holes with a Kreg jig and clamped the pieces together securely. I used both wood glue and heavy-duty screws designed for pocket-hole joints for maximum strength, wiping away any excess glue immediately so the seam stayed clean.


For the doors above the fridge one spare was both too tall and too wide, so I repeated the cut-and-join process in the other direction. Once reassembled and the hinges were refitted, the doors aligned much better than I expected. I was cautiously optimistic—if this worked, we’d avoid the $800 custom order.

At first the seams and joins looked rough, but I knew that careful use of wood putty, sanding, and a self-leveling primer would hide hairline seams and grain differences once painted. We also plan to move the knobs to better positions and replace the hardware for a cleaner final look.

One thing to note: these projects take time. The first two doors took an entire morning each, including test pieces, trimming, recuts, and careful fitting to respect the inset reveal. The microwave cabinet door was simpler—just a few inches removed from the center—and took roughly an hour to complete.

The corner cabinet presented a different problem. It originally had bi-fold doors with hidden hinges, which wouldn’t work with our partial-inset configuration because they would sit proud of the frame. We considered installing a pie-cut lazy susan and mounting doors directly on it, but decided against losing the valuable wide-open storage space. Instead, I repaired the hinge notches in the frame by cutting and fitting small filler pieces with a jigsaw, then screwing them into place so the hinges could be mounted properly.

For that corner, the simplest solution was to create two separate doors hinged on opposite sides. It took much of an afternoon and the following morning to fit them just right, but they now open smoothly and give full access to the wide shelves inside—exactly the functionality we wanted without sacrificing storage.

Overall, the process was slower and more fiddly than I anticipated thanks to measuring, test cuts, and refinements, but the result is solid. Using pocket holes, screws meant for the application, and glue produced doors with no flex or wobble—functionally identical to our other solid oak doors.

Next steps are wood putty to fill seams and screw holes, sanding, and generous coats of self-leveling primer and paint. Once finished, these repurposed doors should blend seamlessly with the rest of the kitchen. If the painted results aren’t what we hoped, we still have the option to order custom replacements from the craftsman for the quoted price, but for now we’re excited to see how the DIY repairs look once painted.

We’re looking forward to the painting stage—after a bit more trim work like toe-kick molding and some finishing details—to complete the kitchen transformation. Realistically, finishing the painting before the holidays will be tight because of putty drying and paint curing times, but once we get through the sanding and priming, the doors should look and perform like new.









