Objectales

Popular

Save on Electrical Work: 8 Smart Ways to Cut Costs

featured 55805

Recessed Lighting and a Pendant: Our Living Room Lighting Update

We recently updated the living room lighting—no cosmetic surgery, just can lights (recessed lighting) and a pendant over the table. The process involved a bit of furniture moving, lots of drop cloths, and some careful planning so the room would be ready for the installers.

img 55805 1

After nearly three years of living here without proper overhead lighting (aside from one small off-center fixture), we finally added two recessed lights and a pendant. While lamps create great ambiance, overhead lights are invaluable when you need brighter, even illumination—like searching for a toy or finishing a project at the table.

img 55805 2

Fortunately, the house already had two fixture boxes in the ceiling from old fans, so the electrician could tap into those locations to install the recessed cans. We debated adding more recessed lights, but for now two provide a dramatic improvement without cutting up the ceiling more than necessary. It’s comforting to know we can add additional cans later now that the wiring is in place.

img 55805 3

For safety, we hired our local electrician—Sean from S.J. Ryan Electric—to handle the attic wiring and install the fixtures. The wiring above the living room was not up to code and looked risky, so it was worth relying on a pro for that portion. We prefer to do the work we’re comfortable with ourselves to save money, but anything involving unsafe or complicated attic wiring is best left to an expert.

img 55805 5

Because the pendant’s old fixture box was off-center by about a foot, we had the electrician move it so the new pendant would be perfectly centered over the table and in front of the window. We’ve moved some fixture boxes ourselves on past projects when there was slack in the wire, but in this case the attic wiring was too complex for DIY, so having the pros do it saved time and avoided headaches.

img 55805 6

We did a few things beforehand to keep labor costs down and speed the job along:

  • moved the sofa out of the work area
  • rolled back the rug
  • laid down drop cloths
  • measured and marked the ceiling for exact fixture placement

Marking the ceiling ahead of time was especially helpful. It prevented any on-the-fly debates about placement while the electrician was on the clock.

After the electrical work was done, we finished the remaining tasks ourselves: hanging the pendant, patching the hole in the ceiling, and reassembling the room. Doing those finishing touches kept the electrician’s time focused on what only they could do and saved money overall.

img 55805 7

img 55805 8

The change from no overhead lighting to two recessed cans plus a pendant is dramatic. The pendant sits crisp and centered over the table and the recessed lights provide even illumination throughout the seating area. It’s a perfect example of how good lighting can truly transform a room.

img 55805 9

Here are some hole-patching tips we used after the electricians finished:

  • Use mesh patches and a good spackle: We applied a mesh patch and used a lightweight spackle for a clean, fast repair.
  • Apply multiple thin coats: Two to three thin layers of spackle, sanding or smoothing between coats, avoids lumps and makes finishing easier.
  • Try a Magic Eraser for light sanding: A slightly damp Magic Eraser can smooth dried spackle without stirring up a lot of dust—handy for small patches.
  • Feather paint beyond the patch: When painting, feather the paint about 12 inches beyond the repaired area and use two thin coats for an invisible finish.

img 55805 11

The pendant we installed is light and crisp with a white canopy and cord that makes it look almost like it’s floating. Another colorful shade from our lighting collection found a happy home on a small desk, adding color and tying in with other decorative pieces in the room.

img 55805 13

img 55805 14

Cost for this update was about $72 in materials (two recessed lights, trims, some wiring and junction boxes) and roughly $200 for labor. Considering the attic wiring had to be corrected and a fixture box relocated, we think that was a fair price for the safety upgrades and professional installation.

img 55805 18

After finishing, we sat on the sofa and wondered why we waited so long to add proper lighting. If you’re planning a similar upgrade, consider a hire-some-but-do-some approach: use an electrician for code work and dangerous wiring, and handle the prep, fixture hanging, and finishing yourself to save money and get the result you want.

img 55805 19

What lighting projects are you working on? Have you mixed professional help with DIY finishing? We’d love to hear about your experiences and tips for lighting, ceilings, and small repairs.