Objectales

Popular

How to Box Out Curved Porch Columns for a Clean, Square Look

featured 57358

And that’s it — the project is finished. Time to celebrate! We decided to box in the porch columns for a few reasons:

  • The carport already has four chunky, square columns, so the three remaining curved columns made the exterior feel inconsistent.
  • Squared, boxed columns are more authentic to a mid-century ranch aesthetic, and we wanted the front of the house to feel cohesive and true to that style.

img 57358 1

After finishing the main framing in a single afternoon, we figured the finishing touches — caulking seams and painting — would fly by. How long could it take to finish three columns, seal the joints, and paint everything? As it turned out, a few unexpected adjustments added time, but the results were worth it.

img 57358 2

Before we even opened the caulk, we decided the newly de-scalloped header looked a little too slight compared with the beefier boxed columns. To give the header more presence, we bought three additional 1×6 boards and layered them over the original 1×3 header, fastening them with wood glue, nails, and a few screws. It was a quick, effective way to balance proportions and make the whole porch feel intentional.

img 57358 3

That tweak didn’t add much time, but the real time-sink was caulking. There were so many seams to seal, and we didn’t want any moisture sneaking behind the wood. From past experience — when we rebuilt a header on our first house and sealed it with primer, paint, and caulk — taking the time to seal everything properly prevents future rot or warping. So we methodically caulked every joint and let it cure thoroughly before moving on.

img 57358 4

We often get asked what caulk we use. We prefer a paintable window-and-door caulk in white so it blends with trim and accepts paint well — paintability is essential for a clean finish.

Once the caulk cured, painting was next. The boards came pre-primed, which sped things up. Fortunately the previous owners had left a couple of gallons of house paint in a neutral, labeled “Creamy Color” — not the most descriptive name, but it matched the porch trim perfectly. That meant no extra cost for paint this time.

img 57358 5

We considered re-painting all the house trim white to match the new columns, but that’s a whole-house project and not something we were ready to tackle. Instead, we focused on the porch. Sherry handled the precision cutting-in along edges while I rolled the larger surfaces — teamwork that got us a smooth, even coat quickly.

img 57358 6

After a single coat and a few touch-ups, the columns were complete. We stepped back and loved how much cleaner and more cohesive the front of the house looked. That small change significantly updated the curb appeal and aligned the porch with the mid-century ranch style we were aiming for.

img 57358 7

Now when we pull into the driveway, the exterior reads more like us. Concealing the ornate, traditional columns with square boxed posts gives the façade a crisper, more modern mid-century feel and eliminates the visual clash with the carport columns.

img 57358 8

Here’s a closer look at the detail where the 1×8 boards on the front and back of each post meet the 1×6 side boards. That slight reveal creates a clean edge and a bit of depth without fussing with ornate trim. (For a sketch explaining why square columns often use two 8″ boards and two 6″ boards, see our earlier porch post.)

img 57358 9

img 57358 10

Budget-wise, the main expense was the primed lumber; we already had paint and a tube of caulk. Here’s the breakdown:

  • Four 1×3 boards for the original thin header: $20.50
  • Four 1×6 boards to build a thicker header: $41.33
  • Six 1×6 boards for the sides of the posts: $62.08
  • Six 1×8 boards for the front and back of the posts: $74.12
  • TOTAL: $198.03

If we’d realized the 1x3s would be too small, we could’ve skipped them and saved roughly $20. We also could have used cheaper whitewood boards, but we prefer pine because it’s smoother and straighter, which makes cutting, fitting, and painting easier. Using pre-primed boards also meant we could skip priming and get a durable finish faster — the same approach held up well on our previous porch project.

img 57358 11

With this porch update complete, we’re energized to tackle more outdoor projects now that spring has finally arrived in Richmond. Over the three springs since we moved in, our curb appeal has steadily improved, and this was another satisfying step forward.

img 57358 12

img 57358 13

What’s on your spring to-do list? Are you planning a big DIY that will jumpstart the season, or are you leaning toward simpler projects and plenty of porch time with lemonade?

PS: I almost titled this post “Porch-a de Rossi” — it was the best porch pun I could muster. Blame it on catching up with Arrested Development.