How to Remove Kitchen Cabinets and Rehang a Cabinet
Well, that can of worms is officially open: we’ve begun making changes in the kitchen. This isn’t entirely new—earlier we removed the wallpaper—but last week we used that momentum to start some more meaningful updates.
We still plan to live in this house for a long time and save up for a full kitchen renovation, so we’re avoiding permanent big-ticket choices for now. We’re still debating long-term layouts and countertop materials, so for the moment we’re focusing on a series of “Phase 1” improvements that should make the room much more enjoyable and functional until the major reno happens. (You can read more about why we like Phase 1 updates on our blog.)

Removing the wallpaper helped, but it mostly revealed how brown and muted the kitchen already was. The appliances, counters, and walls tended to blend together under the fluorescent light, and the dark cabinets and trim felt heavy. So our first move, one Sherry had wanted from day one, was to take down some upper cabinets and open up the space with shelves. We both miss the open shelving we had in our previous kitchen, so the plan was to replace the long upper cabinet to the right of the window with floating shelves.

Sherry emptied the cabinets (luckily the cabinets beside the microwave weren’t used much, so we had room for the displaced items), and I started demo. I carefully pried off the crown molding to reuse it, then tapped away at the header above the window.

That part was straightforward, but taking the cabinet down turned out to be harder than expected. Instead of being screwed in like our last kitchen, these cabinets were nailed to the wall, so it required a lot of prying and jostling to free them. I removed the doors and propped a paint can on the counter so the cabinet wouldn’t fall directly onto the surface or my foot when it finally came loose.

Even with some paint missing behind it, the cleared wall already feels like a big improvement—especially when you’re sitting at the table across the room. Having a clear view of the window and room to add open shelving makes the space feel lighter.

We liked the effect so much that we removed the smaller upper cabinet on the other side of the window too, which balances that wall visually and gives the window room to breathe.

The plan is to install floating shelves on each side of the window. We already own a couple of long white Ikea Lack shelves for the right side and a shorter version will fit the left side, so we won’t lose much storage—those removed cabinets will be repurposed in the garage.
Before we hang the shelves we’ll prime and paint the walls. With cabinet-demo momentum, we turned to another issue: a virtually unreachable upper cabinet tucked far behind the fridge.

It sat so far back that we needed a stool to reach it, so we’d thrown a basket up there to hide it. We wanted to move it forward so it would be reachable and look more like the built-in fridge cabinets common in modern kitchens. I removed the trim and pulled at the nails, and after a fight it came free—though the tight fit left a few drywall dents that were easily covered when we rehung the cabinet.

Because the cupboard opening narrows toward the front, I needed to trim about a quarter inch from each side of the cabinet face to get a seamless fit. I applied tape along the cut lines to reduce chipping and then trimmed with a circular saw.

To mount the cabinet out from the back wall, I built two U-shaped 2×4 braces—one near the top and one near the bottom—anchored into studs on the side walls. That gave a strong front board to screw the cabinet into. After careful measuring and leveling, the cabinet sat perfectly in its new position and is finally usable.

The final step for this stage was reinstalling the crown molding. I reused the pieces I’d removed earlier and matched the existing cuts, filling gaps where needed. We’ll do final caulk and paint touch-ups later, but the result already looks much better than the awkward hole above the fridge we started with.

I also extended the molding around the room so it wraps continuously. The wall still looks unfinished at the moment, but with paint, shelves, and a pendant light over the sink it will come together.

These early changes haven’t completed a full transformation yet, but they’re moving the kitchen in the right direction. In person the room already feels noticeably more open and less heavy than before.

I hesitated to call that photo an “after,” since we still have several Phase 1 steps to finish. Here’s our current Phase 1 To-Do List:
Remove wallpaperMove fridge cabinet forwardRemove upper cabinets on window wall to prep for open shelvesReinstall crown molding- Paint pantry and garage doors
- Paint walls and ceiling
- Hang floating shelves on window wall
- Paint trim and paneling
- Possibly sell the existing microwave and swap for a countertop model and add an inexpensive range hood to lighten the wall
- Update or replace old cabinet hinges and knobs
- Paint the cabinets
- Create a solid back for the peninsula so the nonfunctional cabinet doors aren’t visible, using beadboard or framed wood
- Replace fluorescent lighting, including the sink fixture
- Replace and center the light over the table
- Consider a rug for the eat-in area or peel-and-stick tile for the floor throughout
- Add curtains for the windows
There are a lot of items here, but most of them will carry over into the full renovation later—painting trim, walls, ceilings and replacing lights are all investments that will still apply when we redo the kitchen entirely. Phase 1 is intended to be the useful middle step that improves the room now and sets us up for Phase 2.

We’re purposely not replacing major appliances yet. As much as we don’t love the cream-colored oven and fridge, buying new appliances now could limit future layout options like a wall oven or gas range when we do the big reno. For this phase we’ll work with the off-white counters and cream appliances and choose paint colors that brighten the room without committing us to permanent changes.

Some readers have asked why we aren’t keeping these cabinets permanently. Up close they’re in rough shape—chipped, scratched, and worn—so even with patching and paint they won’t look flawless. We plan to repurpose the cabinets in the garage, so nothing will go to waste. Painting them will give us a nicer temporary look in the kitchen and then provide useful storage in the garage workshop later.

Other readers have suggested painting our faux brick floors. We’d love that, but our floors are a single sheet of vinyl rather than individual brick pavers. The surface already scratches and flakes easily when we move appliances or chairs, so painting would likely wear off quickly. Since the top layer is brittle, we don’t think painted floors would hold up. If we can’t live with them any longer, we’ll likely cover them with affordable peel-and-stick tiles like we used in a previous Phase 1 update—quick, inexpensive, and a dramatic improvement for a short-term solution.

Has anyone else opened a can of renovation worms lately? Sherry’s excited and I’m bracing for the work ahead—but I’m glad to be doing something instead of groaning every time we walk into the room. Bring it on, kitchen!








