Objectales

Popular

DIY Wrap an IKEA Expedit Bookcase with Wood Veneer

featured 63571

Ikea Expedit Hack: Wood-Wrapped Changing Station for the Nursery

One more task checked off the nursery to-do list: a functional, attractive changing station. We turned an Ikea Expedit into a wood-wrapped changing station that blends with the room and provides plenty of open and concealed storage for diapers, wipes, toys, and books.

Ikea-hack-wood-wrapped-expedit

Before Clara was born, a coworker told me changing tables were unnecessary because you often change a baby wherever it’s most convenient. We’d already refinished a dresser for Clara’s changing table, but that comment stuck. To my surprise, we used her changing table religiously—probably because our home was one level and small enough that having a dedicated spot made life easier. In a multi-level home, we plan to keep some supplies downstairs too, but for now a solid changing station is a welcome convenience.

img 63571 2

When we were planning the new nursery, we considered repurposing my dad’s old dresser, which has sentimental value and could double as a changing table. After finishing built-in storage elsewhere in the room, though, adding another big dresser felt redundant. We wanted something that offered a flat surface for the changing pad, a mix of open and hidden storage, and a wide footprint to anchor a long wall and the art we planned to hang above.

img 63571 3

Looking at a previous photo of storage cubbies in our last sunroom gave us the A-ha moment: an Ikea Expedit fit all our criteria. It was currently in the office and not critical there, so we moved it to the nursery to test it out. At first it felt a little plain against the wall—too blendy with the rug and doors—so we decided to give it a wood-wrapped exterior to add contrast and tie it to the wood-topped built-ins and our framed bike art.

img 63571 5

We measured and found that three 1×6 boards would cover the top surface of the Expedit with a slight overhang—perfect for a changing pad that matched the original width. We used inexpensive whitewood boards (the same species we’ve used before) to get a slightly rustic look without breaking the bank. Boards were cut to size on a miter saw and joined into panels.

img 63571 11

To make the panels, I used a pocket-hole jig to create hidden joints and then sanded the assembled panels to smooth seams and edges. Before staining, we applied wood conditioner to reduce blotchiness and help the stain penetrate more evenly. The small can was an inexpensive precaution and produced noticeably richer, warmer color.

img 63571 12

We stained the panels with Minwax Dark Walnut to match other wood elements in the room and sealed them with two coats of a low-VOC finish. Once dry, the panels were attached to the Expedit using wood glue and brad nails so there were no visible screw heads. I roughed up the Expedit surface first to help the glue bond, then secured the panels and side “waterfall” pieces to create a wrapped look.

img 63571 13

After letting everything cure, we considered adding casters to make the unit movable. We tried chunky casters but found they raised the height too much and made the changing pad uncomfortably high, so we removed them and kept simple fixed legs instead. The result sits at a comfortable height for changing—roughly 33–34 inches from the floor with the pad in place, which matched what we preferred from our previous setup.

img 63571 14

We finished by hanging the bike art above and arranging baskets and bins in the cubbies for a mix of concealed diaper supplies and open toy storage. The 3 Sprouts dragon box that belonged to Clara fits perfectly and adds a bit of personality. We’ll likely add a few more large baskets for diapers and wipes, but the configuration already feels functional and tidy.

img 63571 25

For safety and convenience, the same changing pad we used before attaches with oversized snaps that screw into the back edge of the unit. We also used strong adhesive strips to help keep the artwork secure on the wall so little hands won’t easily remove it. The poster-board style art should be wipeable if anything gets messy.

img 63571 24

The whole upgrade cost about $45 for wood and conditioner; we already owned stain and tools, and we returned the casters. The finished piece gives us useful storage and a warm, cohesive look that ties into the rest of the nursery. As the baby grows, we expect it to transition into a sturdy toy and book storage unit—maybe filled with bins of LEGO someday.

img 63571 29

The previously empty wall now feels complete, and the room seems cozier with the addition. We still need a plan for dirty-diaper disposal, and we’ll replace the makeshift changing pad cover with a tailored one soon, but overall this Ikea Expedit hack delivered a practical, attractive, and budget-friendly changing station for our nursery.

img 63571 30

Update: The Expedit itself measures about 31″ tall; with the wood frame and pad the changing surface is around 33–34″ from the floor—comfortable for us based on prior experience. Materials and techniques mentioned included Kreg pocket-hole joinery, wood conditioner, Minwax Dark Walnut stain, and a low-VOC sealer. Total materials cost was roughly $45, plus any tools you may already own.

ShopOurHouseBannerSHORT

Have you ever repurposed an Expedit or converted it into a changing station or toy storage? This approach is a great way to get a custom look without investing in bespoke furniture, and small modifications like added wood cladding can make a big visual difference while keeping cost and effort reasonable.