How to Hang IKEA Wall Cabinets: Step-by-Step
Installing Ikea Cabinets in Our Laundry Room: A Step-by-Step Update
This post started out a little chaotic: we were trying to hang Ikea cabinets in our laundry room while also re-hooking the washer and dryer. By yesterday morning both projects were only half finished, so this was the best progress photo we had at the time:

Fortunately, in the last 24 hours a few last-minute pieces fell into place. The appliances are reinstalled and working (yes, there was celebratory dancing) and all the cabinet doors are on. I’ll share the appliance reinstallation details in a future post — getting the overflow drain and washer pan connected took some effort — but today I want to focus on the cabinets and what we learned installing Ikea units in a small laundry room.

We’ve considered Ikea for our eventual kitchen remodel, so the laundry room was a low-risk place to test their cabinetry. We’ve tried custom cabinets in a previous house and refinished and reused existing ones in another, but despite living with plenty of Ikea pieces, we’d never installed their cabinets. This felt like the perfect opportunity to try their system, learn the process, and decide whether it could work for our kitchen later.
We began with Ikea’s online Kitchen Planner to map the space and generate a shopping list. It’s a simple, free tool that helps visualize layouts and prepare a parts list for the store. (Pro tip: the planner doesn’t include a dryer option, so I added a dishwasher into the plan as a placeholder.)

After sketching our plan we met with an Ikea kitchen expert who helped us fine-tune the layout and avoid unnecessary purchases. She also suggested trim to conceal under-cabinet lighting — a last-minute decision we made so stains would be easier to spot and treat.
In the showroom we adjusted our cabinet door choice. The Ramsjo looked promising online but appeared more whitewashed in person, with pinkish undertones. The Adel, labeled “off-white,” actually read closer to the clean white we wanted. It wasn’t a perfect match to pure white, but it felt right for scale and finish.

Everything we needed was in stock, so within an hour — and after spending about $800 — we were loaded up and heading home. The drive ended up longer than expected because a highway closure forced a long detour, but we eventually made it back and began assembly.

Assembly isn’t as bad as some people make it out to be, especially when you’re only working with a few cabinets. We had three upper cabinets and one lower cabinet to build. Doing the uppers assembly-line–style sped things up. The most tedious part was nailing the back panels on — each cabinet takes a lot of small nails — but it was manageable.

One feature we appreciated right away was Ikea’s wall-hanging system for upper cabinets. Instead of screwing each cabinet into the wall, the cabinets hang from a metal rail that you install into the wall studs. This makes aligning and leveling multiple cabinets much easier than some traditional mounting methods.

The rail arrives as an 80″ piece, but we only needed the length for three 24″ cabinets. The instructions recommend a hacksaw, but a Dremel made the cut quick and clean.

Figuring out the rail height took some planning. We’ll add crown molding to match the rest of the house, so we had to account for the crown’s height and for the fact that the cabinets hang a few inches below their top edge. After determining the correct height, I drew level lines on the wall to mark the rail placement and then made a second, slightly higher reference line so it would remain visible once the rail was installed.

We also marked the studs so every screw would bite into solid framing. Our wall was flat, so we screwed the metal rail directly into the studs; if your wall is uneven you may need shims as the instructions suggest.

With the rail secured, we slid the hanging bolts into place and lifted each cabinet onto the bolts. The frames are fairly light without shelves or doors, so one person can hoist them into position. We installed the center cabinet first, then the right and left. Each cabinet rests on two bolts; you add a metal clip and nut and tighten them to lock the cabinet in place. The clip lets you fine-tune the height for perfect leveling.

After hanging all three upper frames we clamped them together and bolted them side-to-side to eliminate gaps and make a single rigid unit. I drilled through the peg holes and used the supplied screws to secure the adjoining cabinets. (Note: it’s best to use the top and bottom peg holes for these bolts to avoid interfering with door hardware — we learned that after the fact and corrected it quickly.)

Finally, we snapped on the white plastic caps to conceal the hanging hardware and installed the doors. Ikea’s hinges attach with a clip-on system that allows easy adjustment with small screws; we didn’t have to drill any additional holes.

One surprise: the door color. In photos the Adel door looked near-white, but in person it read creamier and warmer than our trim color, which is painted Simply White. After some research we discovered that another Ikea door style, Lidingo, is reported to match Simply White more closely. We stopped installing the Adels and planned a return trip.

Luckily, my parents were able to pick up the Lidingo doors on their way through Northern Virginia, and the difference is dramatic. The Lidingo doors fit the house’s trim color much better and instantly elevated the look. We installed those last night after the kids went to bed, and even slid the lower cabinet into place for the sake of the photo — it still needs securing to the wall, trim, hardware, a counter, and a toe kick to be fully finished.

There’s still a list of finishing tasks — filler pieces, crown molding, shelves, hardware, countertop — but those details are what bring the space together. We’re excited to introduce some wood tones, likely a butcher-block counter, to warm up the bright white cabinets and complete the laundry-room makeover.

For now, we’re relieved to have functional appliances and clean-looking cabinetry. The Ikea system proved straightforward and efficient for this small project, and the experience will help guide our decisions for the kitchen remodel down the line.









