How to Install a Peel-and-Stick Wall Mural
We were excited to try wallpaper in our duplex, and last week we finally installed peel-and-stick wall murals—two of them, in fact. The whole process was much easier than we expected, and the finished rooms look far better than we imagined.

We had been browsing wallpaper options when we found removable wall murals on Society6. These are essentially peel-and-stick wallpaper printed as wide panels (many are 8 feet wide, some 12). Because our small rooms are only 8 by 8 feet, these wide, single-pattern murals were ideal. We also liked that they’re removable, so if we change our minds later the panels peel off without the mess of traditional paper-and-paste wallpaper.
This post isn’t sponsored—we bought the murals ourselves and are sharing our honest experience.
Why We Picked Peel-and-Stick Murals
Beyond the size fitting these bunk rooms perfectly, here are the main reasons we chose removable wall murals:
- They support bold, large-scale patterns and painterly images that are hard to find in budget wallpaper.
- Installation is straightforward—no paste or messy adhesive, and panels can be peeled and restuck if they’re not perfect the first time.
- The manufacturer provides demonstration videos that give a clear idea of what to expect.
- The material is durable—think thick, flexible vinyl with a textile-like feel.
The Murals We Chose
After debating options, we picked two painterly patterns: a blue, watercolor-style whale design and a leafy orange blossom pattern. We hung the whale mural on the side of the duplex with pink doors (paint color: White Truffle by Sherwin Williams) and paired the orange blossoms with the side that has green-blue doors (Oyster Bay by Sherwin Williams).

We ordered the murals during a 30% off sale and saved a good chunk off the regular price. Installing them took patience but not specialized skills: our first mural took about three hours and the second one about two hours, so the process gets faster as you go.
Tools and Supplies
You don’t need many tools, but these items make the job easier:
- Step ladder
- Level
- Pen or pencil
- Ruler or tape measure
- Flathead screwdriver
- Scissors
- Utility knife or sharp craft knife
- Smoothing tool (or a credit card in a pinch)
- An extra set of hands—this is much easier with two people
Step 1: Organize Your Panels
Each 8-foot mural arrives as four 2-foot-wide panels rolled together. Because the pattern isn’t repeating across the roll, identify the correct panel order before you start. We unrolled the panels and laid them out to confirm the sequence so we wouldn’t accidentally put a panel on the wrong side.
Step 2: Position the First Panel Carefully
Every panel has a removable backing—no glue required. Peel back small sections at a time. We began by peeling about a foot of backing from the top of the first panel, folded the peeled section behind the mural, and stuck the top corner to the wall to hold it in place.

Getting this first panel straight is crucial. The good news is the material is forgiving—you can stick, unstick, and restick it several times without losing adhesion or damaging the surface. We probably readjusted the first section four or five times while finding our rhythm.
Tip: Use a level
Don’t rely on the ceiling or corner as your only guide—most rooms aren’t perfectly square. Instead, mark a vertical reference line with a level and use that line for the outer edge of your first panel. We marked a line about 23.5 inches from the corner so our 24-inch panel overlapped the side wall slightly to avoid gaps where walls bow out.

We also left about an inch of overlap at the ceiling to account for small variations in ceiling height. That extra inch is easy to trim later.

Step 3: Peel, Stick, and Smooth
Once the first panel is positioned, peel back a little more backing, press the mural to the wall, and smooth out air bubbles. Work from the middle outward. We used a credit card as a smoothing tool and it worked fine. If something looks off, peel it back and restick—this material is forgiving.

Continue until you reach the baseboard; you’ll trim the excess later.
Step 4: Align the Second Panel
These murals aren’t printed with overlapping seams, so the second panel butts up against the first. Peel a small section of backing and align the pattern carefully. The panels stretch slightly, so avoid pulling or stretching one panel more than the other. If alignment drifts as you go down the wall, peel it back and try again until the pattern lines up neatly.

Step 5: Trim Around Small Obstacles
For switches and outlets, turn off the power and remove the cover plate. Loosely stick the mural over the opening, feel the edges of the switch or outlet through the material, and carefully cut around it with a utility knife. Leave enough material so the cover plate can be reinstalled cleanly, then smooth the mural and screw the cover back on.

Step 6: Work Around Windows and Doors
Large openings require a bit more trimming. Start the panel at the top as usual and, when the trim prevents the panel from lying flat, carefully cut away the portion that would sit over the window or trim. Be conservative—leave a few inches of excess and trim more as needed. When enough is removed, press the mural flat and smooth it into place, leaving excess over the trim for final trimming.

Step 7: Finish the Last Panel
The final narrow strip between a window and a wall can be tricky to align. If the seam refuses to lie flat, prioritize aligning the pattern where it will be most visible. We split a narrow section of a panel at a mostly white area and created a slight overlap that’s barely noticeable—especially once furniture hides the seam.


Step 8: Trim Excess with a Knife
Trimming the overlap at the ceiling, baseboards, and side walls can be done as you go, but we waited until the end as insurance in case we needed to reposition panels. Smooth the mural well, press a crease at the edge, and trim along that crease with a sharp utility knife. One of us cut freehand along the crease while the other used a smoothing tool as a cutting guide—both methods worked depending on the edge type.

Step 9: Enjoy the Result
Installing these murals took a few hours per room, but the transformation was immediate. The two small rooms now feel like cozy, charming sleeping nooks instead of bland rentals. We still need to finish furnishing them—we’ve built twin bed platforms and are awaiting mattresses and bedding—but the murals dramatically changed the spaces right away.


We’re thrilled with how painless the installation was and how much character the murals added. It’s tempting to find more spots in the beach house or our own home for another mural—the process is satisfying and the impact is big for a relatively small investment.
For transparency: this post contains affiliate links in the original, and the murals were purchased with our own money.








