DIY Painted Oars for Beach House Decor
When we shared the duplex backyard transformation last month, I promised a closer look at the decorative oars we hung on each shed. Here’s a step‑by‑step guide to how we made them weather‑ready, the mistakes we learned from, and a few practical tips you can use if you decide to make your own.

The oars weren’t in the original plan. At first we intended to run electricity to the sheds and hang lights above the doors, but we ultimately skipped that for cost reasons—and because the sheds don’t really need power. That left a blank area above the door that called for a decorative solution.

A decorative surfboard spotted at HomeGoods gave us the idea to use paddles instead, which felt more appropriate for our small beach town where kayaking and paddle boarding are common. I searched options on Etsy but many were priced well above our budget—some were $350 or more for a set. Then we found two decorative oars at HomeGoods for $25 each. They weren’t our preferred colors, but paint is an easy fix, so we bought them and tested the size and shape against the shed before committing.
We ended up finding two more oars at a second HomeGoods, bringing the total to four for just over $100. They were affordable, but when grouped together they looked mismatched and rough—so I sanded them down to bare wood. An orbital sander made the job much faster and left a smooth surface ready for stain and paint.

Sanding took some effort, but it was worth it. After stripping them back I stained the oars so their wood tones matched more closely. I mixed and layered leftover stain cans—most notably Rustoleum Summer Oak and Minwax Weathered Oak—until the group read as cohesive.

Before painting, I photographed the oars together and experimented with stripe and color patterns digitally. That mock‑up made final decisions easier and helped ensure the palette coordinated with colors we used elsewhere on the duplex—mint green shutters, white siding, and the muted pink and green from interior doors.

Using the mock‑ups as a guide, I taped off the oars with painter’s tape. I deliberately left many thin wood stripes in the design to reduce the number of times two painted colors would touch—this saves time because adjacent colors need to be painted and dried in stages. For the top section of one oar I applied a base coat of mint before taping to ensure crisp lines for subsequent colors.

I primed each taped area with our preferred primer, then painted each section with exterior paint. The mint was Sherwin‑Williams Pale Patina; the white was a handy exterior Snowbound; the pink and navy were richer versions of our interior door colors (Downing Pink and Riverway, respectively). Important note: use exterior paint for any item that will be outdoors—natural light can wash colors out, so you may need slightly stronger tones than you’d choose inside.

Everything looked great as the paint dried and we peeled away the tape to reveal crisp lines—until the final sealing step went wrong. I reached for an oil‑based exterior polyurethane to seal the oars for long‑term outdoor durability, but I didn’t test it first. Oil‑based sealers can yellow over time, and in this case they caused noticeable yellowing and streaking as the finish pooled on the slightly rounded oar surfaces.

While the yellowing would likely have been less visible from a distance, I wasn’t happy with how it dulled the colors and introduced streaks. So I sanded off the affected spots, re‑taped, and repainted all four oars. In hindsight the better approach would have been to seal the bare wood first—both sides—then paint the stripes with exterior paint. Because the paints were already exterior grade, sealing the painted areas wasn’t strictly necessary; only the raw wood needed the extra protection.

After the repaint they looked fresh and vibrant again. Hanging them was straightforward: I prebored small holes through the oar and siding and secured each with a 3″ exterior screw driven into a stud. I avoided screwing through painted sections when I could so the screw heads blended with the wood tones rather than contrasting against light paint.

This process—sanding, staining, sealing the raw wood, and then painting exterior‑grade colors—works for many outdoor wood projects, whether you’re making decorative oars, a surfboard sign, or a painted outdoor plaque. A final practical tip: string lights help tie outdoor spaces together and add atmosphere.

We’re happy with the finished look, and despite the extra repainting the oars add a playful, coordinated touch that suits the duplex and our beach‑town vibe. For the full backyard reveal, including shed and patio details, sources, and furniture, see our duplex backyard post—and if you missed it, check out the pink house backyard makeover we completed right after this project.

*This post contains affiliate links








