Bathroom Remodel: Designing the Floor Plan and Choosing Tile
Master Bathroom Renovation: Final Floor Plan, Tile Picks, and Decisions
We’ve made significant progress since the initial partial demolition, and we’re excited to share the final floor plan and our tile selections. This renovation is a dramatic improvement over the original layout, and we want to explain the choices we made, what we considered, and why we landed where we did.
To start, the previous bathroom felt dark and closed off. Multiple doors and partition walls prevented natural light from traveling through the space, leaving only a small amount of daylight near the toilet and tub. It was a cave-like layout we lived with for years, so opening the room up was a top priority.

The photo below shows the bathroom before last week’s demo. This perspective was taken from the closet doorway looking back toward the tub, which helps orient the original layout in relation to the plans we later drew.

After removing the walls that blocked light and sightlines, the space already felt far more open. That unobstructed view helped us visualize practical layouts—what size vanity and tub would fit, and where the shower should go.

For reference, here’s the original floor plan:

We explored dozens of layouts—literally hundreds of sketches and taped floor mock-ups—and consulted with our plumber and electrician to confirm what was feasible without an excessive cost. The final plan kept the room open and light while maximizing function, shown below.

Our design intent is soft, layered tones and textures with classic finishes. We wanted the renovation to feel timeless and to suit the house while transforming the previously dark, dated space into an airy, welcoming bathroom.
One important decision was whether to add more windows. In the end we kept the single existing window because it provides plenty of light now that the intervening walls are gone. Adding a second window would have looked unbalanced from the exterior and required additional structural work, so we used the wall space for the vanity mirror and lighting instead.

We considered taking square footage from the bedroom or closet, but when the walls were removed we realized the space is already generous—about 8 by 13 feet. That allows for a 72-inch double vanity, a deep freestanding soaking tub, and a roomy walk-in shower, with space to spare. We also decided to keep direct closet access through the bathroom, widening and centering that doorway so light flows through both rooms and dressing is convenient right after showering.
Talking to our tradespeople clarified technical limitations. For example, existing ductwork in the shared wall meant a pocket door wasn’t possible; instead, we’re using a frosted door for privacy and light transfer. We initially considered a large double French door, but ultimately a single frosted door seemed the most practical and visually pleasing.
We also weighed adding a water closet. After removing walls we preferred to keep the bathroom open and light-filled rather than partitioning off a small toilet room. That allowed us to dedicate space to a soaking tub and a comfortable shower instead.
Regarding the closet, we briefly considered a window but decided against it because the placement would have looked awkward and might have affected hanging clothes. Instead, we plan to use thoughtful closet lighting and a customized storage solution combining Ikea systems with built-in trim for a cleaner, more useful space.
With the layout finalized, we ordered larger items: the tub, the toilet (the same model we love from our downstairs powder room), and the double vanity. The tub and toilet have already arrived, and the vanity is due soon, which lets the full demolition proceed.

Tile selection became the next major decision. We pursued a classic tile in a more unexpected arrangement to give the shower walls movement and character. Initially we explored 2 x 8-inch tiles in several compositions—four-by-four, three-by-three, and a stair-stepped pattern. The stair-stepped layout felt the most dynamic and less “square” than some of the other options.

Some 2 x 8 tiles were costly or out of stock, so we visited Home Depot, The Tile Shop, and Floor & Decor to see options in person. At Floor & Decor we found a 2 x 12-inch Bianco Orion polished marble mosaic that we loved. Laid out on the floor, the 2 x 12 tiles produced the same stair-stepped effect but with a 3 x 3 arrangement. We paired the wall mosaic with marble hex tiles for the shower floor and a large-scale marble-look porcelain floor tile for the main floor.

Seeing tile samples on the floor clarified the selections much faster than working from a screen. For the room floor we found an oversized marble-look porcelain tile at Home Depot that balanced beauty and value. It’s an affordable, polished option that reads like real marble without the maintenance and will run continuously through the bathroom and closet for a seamless, cohesive look.

We also explored other tile patterns—chevron, herringbone, brick-lay, basketweave—and several colorways, but the final combination delivers the layered, classic aesthetic we wanted: marble-inspired walls, a textured shower floor, and a larger neutral floor tile that ties everything together.

Next steps: full demolition, plumbing adjustments in the floor, tile work, wall repairs, and electrical updates before installing the new fixtures. With the tub, toilet, and vanity on order, we expect to gut the room soon and move quickly into the installation phase. Our small personal goal is to have the tub usable around November 15th as a special birthday surprise—fingers crossed everything proceeds on schedule.
P.S. If you missed the initial post and the half-demo tour, check the first renovation post for a video walkthrough and earlier photos to see how much the room has changed.
*This post contains affiliate links*








