Objectales

Popular

DIY Hanging Daybed Plans: Build a Cozy Outdoor Bed

featured 96654

Back in October we mentioned our plans to add a hanging daybed to the covered portion of our front porch, and our whole family is thrilled that it’s finally finished.

Two Kids Reading On Either End Of White Hanging Daybed Swing

Hanging daybeds are very popular around here, and we’ve always loved the idea of one. There’s something wonderful about reading or napping outdoors on a lazy Saturday afternoon.

John Laying Fully Stretched Out On Hanging Daybed Swing

Staying at an Airbnb in Costa Rica last January confirmed it for us — the hanging daybed there was the perfect outdoor lounge. Sherry and our daughter spent hours leaning against the side arms with their legs extended toward each other, reading, chatting, and gently swaying.

img 96654 3

Our front porch turned out to be an ideal spot: it’s covered to protect from rain and strong sun, it has exposed beams sturdy enough to hang from, and there’s a fan nearby to keep the area cool.

Blue Ceiling On Covered Porch With Ceiling Fan And Black Chairs

The space isn’t quite deep enough for a full twin-mattress-sized daybed without blocking our path to the outdoor shower and making the wicker storage area awkward to use. We needed clearance so loading beach chairs and moving through the space would remain easy.

Covered Porch With Blue Ceiling And Open Door To Outdoor Shower

We ended up choosing a cushion that is three inches shorter than a standard twin length (still a roomy 6′ long) and 10″ less deep. At nearly 30″ deep it aligns more with typical sofa cushion depth, which is comfortable for lounging and gives us the needed passage clearance.

Finished White Hanging Daybed Under Covered Front Porch

The nearby egg chair swivels so anyone seated there can easily turn to face someone on the daybed. That small layout detail makes the whole porch feel more social.

Finding an Outdoor Daybed Cushion

Because this sits outdoors, we needed a weather-resistant option. Some people use a regular twin mattress inside a waterproof cover wrapped in outdoor fabric or order a custom mildew-resistant foam pad with an outdoor cover. That route can be expensive, heavy, and cumbersome to remove for storms or cleaning.

Instead, we found an off-the-shelf outdoor replacement cushion designed for patio furniture and built a frame to fit it. Using a cushion already made for outdoor use meant it was lighter, quick-drying, easy to clean, and less costly than a fully custom solution. We ordered a long outdoor couch cushion and three oversized back pillows during a summer sale, and although they were back-ordered, they arrived before Christmas and have held up well to sun, rain, and the usual family spills.

Angled View Of Finished Outdoor Hanging Daybed With White Cushions

Materials

Below are the materials we used for our hanging daybed built around a 28″ x 72″ cushion. Adjust quantities and board sizes if you plan to build around a standard twin mattress (38″ x 75″). If you plan to stain instead of paint, don’t buy pre-primed wood.

  • Three 8′ 2×4 boards (frame)
  • Four 8′ 1×4 boards (slats)
  • Three 8′ 1×8 primed boards
  • Three 8′ 1×4 primed boards
  • Two 8′ 1×3 primed boards
  • Three 8′ 1×2 primed boards
  • A box of 2″ exterior screws
  • Exterior-grade wood glue
  • Four 5-gallon buckets (used during assembly)
  • Eight screw eye hooks (for ceiling and bed)
  • 3/4″ natural hemp rope (we used a 48-foot length)
  • Outdoor-rated primer and paint (semi-gloss exterior)

Building the Daybed Platform

Building the platform was straightforward. We combined what we learned from previous projects with a helpful tutorial that provided clear steps. The structural core is a simple 2×4 frame built to the cushion dimensions and secured with exterior screws. That frame supports the cushion and accepts the hanging hardware.

John Laying Fully Stretched Out On Hanging Daybed Swing

To give the platform a more finished look, we wrapped the frame with 1×8 boards. Before attaching the outer boards, we propped the frame on scrap wood to set how much of the cushion would be recessed by the lip — enough to hold the cushion in place but not so much that it would catch you when you sit down.

Screwing 2x4 wood frame together for hanging daybed

We attached the 1x8s from the inside of the frame to avoid visible screw holes and then added DIY slats from cut 1×4 boards to create the platform surface. After assembly, we primed and painted everything with the same exterior paint used on our trim to protect the wood from the elements.

Screwing 2x4 wood frame to white 1x8 board
Fully constructed 2x4 platform frame with white 1x8 around outside

Propping the frame on 5-gallon buckets during assembly made positioning and hanging easier later on.

Building the Daybed Arms

The arm and rail style is a personal choice. We matched the horizontal rail look used elsewhere on the house and decided not to build a back rail so the bed encouraged facing outward toward the yard. You can always add a back later if you prefer.

Daybed arm corners finished and in place

Start by adding corner posts at all four corners from two 1×4 boards attached at right angles. We kept our arm height low — about 17.25″ tall — which supports pillows for leaning but keeps the sightlines open. From there we attached horizontal rails, secured with exterior glue and brad nails, and added a flat 1×4 arm cap. A small 1×2 trim along the bottom of the frame was added for a finished look.

Nailing 1x4 slat across top of platform frame
Nailing top piece to daybed arm

After assembly we wood-filled nail holes, sanded smooth, caulked seams, and painted everything in a semi-gloss exterior white.

Daybed frame fully constructed and painted white

Hanging the Outdoor Daybed

We experimented with multiple hanging methods: first using two anchor points, then moving to four. The four-point hang offered clear advantages in stability and comfort. The main requirements are finding solid joists or structural members in the porch ceiling and using strong eye hooks, rope, and secure knots. We used 3/4″ natural hemp rope, heavy-duty eye hooks in the ceiling and on the bed, and standard knot techniques.

Finished White Hanging Daybed Under Covered Front Porch

Propping the bed on buckets during setup kept it level and made it easy to tie off ropes at the right height; once weight is applied and ropes settle, the bed drops to a comfortable position. Always double-check attachment points and hardware ratings for safety.

Natural hemp rope bundle for hanging daybed

Now rehung properly, the daybed has already become a favorite spot to lounge. The cushion is wide enough for two people to sit upright at each end, or for one person to sprawl out comfortably.

View Of White Hanging Daybed Swing Under Covered Porch Through Open French Doors

Budget

Aside from the cushion set, the build was budget-friendly. We paid $399 for a long outdoor couch cushion plus three oversized pillows, and kept the construction materials economical. Our base costs were:

  • Wood: $150
  • Buckets: $14
  • Eye hooks: $25
  • Rope: $28
  • Total for materials (excluding cushion): $217

Adding the cushion set brings the project total to $616. While not inexpensive, this is considerably less than many custom-made hanging daybeds, which can be $1,000–$2,400. Building your own lets you customize size, finish, and cost.

Side View Of Finished White Hanging Daybed With Cream Cushion

We’ll share a follow-up post and video detailing the hanging methods that worked best for us, including knots, anchor placement, and lessons learned. For now, the daybed is in regular use and has become a sunny, breezy spot the whole family enjoys.

Want to see more of our building projects and furniture upgrades? Check the furniture upgrades and the house project archive for past projects and updates.

*This post may contain affiliate links; we may earn a small commission at no additional cost to you when purchases are made through links used in prior research.