How to Convert an IKEA Malm Into a Built-In Dresser
Simple Ikea Malm Dresser Hack to Create a Built-In Look for a Beach House
There will always be a soft spot in my heart for a good Ikea hack. This one isn’t complicated—in fact, it’s wonderfully simple and approachable for anyone. With only a few updates to a basic $99 Malm dresser, we transformed it to look like a custom built-in at the beach house. The finished piece fits perfectly into a narrow nook at the top of the back staircase and serves as the main clothes storage for that bedroom.

Rug / Striped towel / Leather hardware / Gold mirror / Bathroom table
One of our favorite Ikea strategies is to make affordable pieces read as built-ins. Our early projects included using wardrobe boxes to create a sleeping nook and wrapping dressers into floor-to-ceiling bookcases. Those projects required more molding and shelving work, but the principle is the same: add trim, a top, and thoughtful hardware to elevate a simple unit.

For this beach house nook, the process was straightforward: remove the existing base trim so the dresser could slide wall-to-wall, add filler pieces to close the side gaps, attach quarter-round around the dresser’s footprint, and finish with a thicker wood top and leather pulls for a custom look. The results feel intentional and original to the home while remaining budget-friendly.

This dresser now functions as the main clothing storage in the back bedroom where we stay at the beach. Originally that bedroom opened directly to the back staircase and the kitchen below. Adding a wall with sliding pocket doors gave the bedroom much-needed privacy and helped the space feel finished—while still letting natural light through when the doors remain open.

Creating the wall also formed the little nook that became dresser storage. At first we considered framing the space as a closet with a door, but that would have made the landing feel crowded. Leaving it open and tucking a dresser in keeps the stair landing airy while providing practical storage.

Lucky for us, the nook was almost exactly the width of an Ikea Malm dresser. To fit the dresser flush to the walls we first pried off the baseboard and quarter-round. After assembling the dresser, we slid it into place and used painted 1×2 filler strips to bridge the small gaps on each side. Those filler pieces were aligned with the dresser front and nailed through the dresser sides into the wall for a solid hold. A little caulk later smoothed any remaining cracks.


Safety note: in addition to nailing through the dresser sides, be sure to anchor the back of the dresser to the wall with the supplied hardware. Dressers can tip, so wall-anchoring is a vital and necessary step.
On one side we reinstalled a short section of baseboard behind the filler to keep the trim lines continuous, then added quarter-round so it butted right up to the dresser. Running quarter-round around the dresser’s footprint is a major contributor to the built-in illusion, making the unit read as part of the wall rather than a free-standing piece.

We hadn’t planned to add a wood top initially, but the dresser looked undersized with the thin factory top. A leftover butcher-block countertop from the kitchen made a dramatic improvement. Because old houses aren’t always square, we made a cardboard template first and carefully cut the wood to match the nook’s angles. The thicker wood top ties the dresser visually to the house’s other warm wood elements—doors, pine floors, and the kitchen counter.

The wood top made a huge difference. If you don’t want to buy a full countertop, many stores sell smaller project panels or you can use wood planks to create a similar effect.

Leather pulls were another inexpensive upgrade that gave the unit a custom feel. A simple change in hardware helps the plain Malm fronts look more finished and intentional. When installing pulls, measure carefully and take steps to prevent chipping the white finish. Painter’s tape over the drilling area helps reduce surface splintering; for the drawer exit point clamp a scrap piece of wood inside the drawer to support the finish and avoid flaking.


Caulk earned the title of unsung hero on this build. We used it to blend seams in the baseboard, smooth the transition between filler pieces and wall, and hide small gaps. A thoughtful bead of caulk makes the whole installation look polished and intentional.

We finished the nook by hanging a round gold mirror above the dresser, which helps a small space feel larger and brightens the corner. For short visits we often keep the top clear to set a suitcase on, but the drawers have been great for unpacking and storing clothes during longer stays.

Finally, for anyone worried about safety at the top of narrow stairs: there is ample floor space behind the dresser to stand and access drawers without any danger of tipping or falling backward. We tested the clearance to be sure, and it’s comfortable to reach into an open drawer.

If you’re inspired to try Ikea hacks of your own, here are a few ideas that have worked well for us:
- Built-in-style wardrobes created from wardrobe boxes and trim
- Wood-wrapped bookcases and changing tables made from standard shelving units
- Converting dressers into built-in bookcases with added shelves and molding
- Custom mudroom closets using wardrobe systems
- Spray-paint and contact-paper customizations for glass shelving units
- Using kitchen cabinets to create built-in storage in bonus rooms

For more furniture hacks and DIY projects, explore our collection of furniture upgrades and building ideas. These low-cost, high-impact changes can transform mass-market pieces into something that looks custom-made for your home.
P.S. If you want paint color details or the sources for furniture and accessories in the beach house, our beach house shopping and paint notes include that information.
*This post contains affiliate links*









