Objectales

Popular

How to Paint Bathroom Floor Tiles Without Removing Them

featured 88727

I know many of you are waiting for our annual Black Friday deals post—I’m putting that together now—but in the meantime I had to share a fantastic budget-friendly bathroom tile makeover sent in by a reader, Angela. She completely transformed an old, blotchy beige floor by stenciling over the existing tiles, spending under $75. Even better: after more than seven months of everyday bathroom use, including showers and regular foot traffic, the floor is still holding up well.

img 88727 1

Believe it or not, the polished tile you see above was the same beige floor she started with—she didn’t rip up or replace the tiles; she painted them. The results show you don’t always need a full renovation to get a fresh, modern floor look.

img 88727 2

Angela reported the finish still looks great after months of shower spray, toothpaste splatters, and daily use. If you have tile you’re not thrilled with but aren’t ready for a full remodel, stenciling can be an affordable, effective interim solution.

img 88727 3

Here’s a clear, step-by-step overview of how Angela achieved this look.

Ordering the Stencil

She began by measuring her tiles precisely—within 1/16th of an inch—and requested a custom stencil to match that size so the pattern wouldn’t overlap the grout. Angela ordered a stencil she liked from Etsy and asked the seller to make it to her exact dimensions.

img 88727 4

To choose the color combination, she tested a few options on spare tiles and placed them on the bathroom floor to visualize the final look. If you don’t have extras, cardboard or sample boards can work just as well for testing.

img 88727 5

Prepping the Floor

Preparation is the most important and least glamorous part of the project—don’t skip it. Angela thoroughly cleaned the floor, sanded the tile surface with 120-grit sandpaper to remove the sheen and create a profile for adhesion, and then wiped everything down with a liquid deglosser. She made sure all dust and debris were removed before painting.

img 88727 6

To keep the area clean during work, she used a pair of socks that she only wore inside the bathroom, and she even used a blow dryer to clear remaining dust after sweeping. She taped off the base of cabinets, walls, the toilet, and the tub with blue painter’s tape to protect adjacent surfaces.

Painting the Floor

Angela started with a base coat, using leftover Rustoleum Chalk Paint in Aged Gray to paint the tiles. She began at the point farthest from the doorway so she wouldn’t trap herself, painted the grout lines first, and then filled in the tile faces. Her floor required only one coat of the base color, although you can apply up to three coats if needed.

When the base coat dried, she positioned the stencil over each tile, secured it with painter’s tape, and rolled on thin coats of her accent color with a high-quality foam roller. Thin coats are crucial to prevent bleeding under the stencil; rolling excess paint onto a paper towel before applying helps achieve crisp lines. She applied two thin coats of white for the stenciled pattern.

img 88727 7

Move the stencil tile by tile, avoiding any wet areas, and speed drying with a cool blow-dryer between coats if needed. Angela noted that having a second stencil to alternate while one dries would have saved time.

Edge tiles and areas near fixtures required a bit of creativity: she bent the stencil to fit against walls, used small pieces of painter’s tape to mask awkward gaps, and used a small brush to touch up spots where the stencil couldn’t reach. Those final touch-ups take patience but are straightforward.

img 88727 8

Sealing the Floor

Sealing is the finishing step. Angela used a water-based Minwax Polycrylic in satin to protect the painted surface (water-based finishes are less likely to yellow than oil-based products, which matters with light colors). She applied four thin coats of Polycrylic, allowing about two hours drying time between coats and lightly sanding between layers for a smooth, durable finish.

img 88727 9

The finished floor offers a convincing cement-tile aesthetic at a small fraction of the cost of a full tear-out and replacement. Angela is pleased with how it’s held up; she considers it a very good medium-term solution and plans to refresh the protective topcoat annually to keep the finish in top shape.

img 88727 10

Note: Angela knew this project was for a bathroom and not a high-traffic living area. If you need extra durability, adding a full-coverage primer or choosing a porch-and-patio floor paint designed for heavy wear are good alternatives; she chose chalk paint for low fumes while working around family bedrooms.

Huge thanks to Angela for sharing her project—follow her on Instagram at @angelarosehome to see more of her updates. And check back here this Friday for a roundup of the best Black Friday deals on furniture, home accessories, and other decor items.

PS: If you want another example, we once stenciled our closet and bathroom subfloor after removing carpet; that treatment lasted five years with minimal wear.

*This post contains affiliates*