Objectales

Popular

How to Spray Paint Chair Legs in Oil-Rubbed Bronze

featured 37970

Spray paint again — surprise, not. When it comes to solving small decorating annoyances, my go-to fix is usually a can of spray paint. For a while now I’ve wanted to give the legs of this old living-room chair an oil-rubbed-bronze (ORB) finish. In person the legs read as bright red-orange and clash with the rest of the room…

img 37970 1

…instead of matching the darker ORB finish we added to Karl the sectional:

img 37970 2

The chair’s original leg tone also didn’t sit well with the gray-washed ceiling beams or the richer brown tones in the console table we built behind the sofa. We plan to refinish the floors eventually—likely in the same color family as the console—so the current orange undertones are temporary background noise.

img 37970 3

For this quick update I grabbed a can of Rust-Oleum Universal Metallic spray paint in Oil Rubbed Bronze — the same finish we used on Karl’s legs. I won’t get into product links here, but this is a readily available spray paint that creates a subtle metallic sheen without being overly glossy.

img 37970 4

Preparation matters. I spent about fifteen minutes protecting the upholstered seat by wrapping it in two large black garbage bags, cutting small holes for each leg, and sealing the plastic with painter’s tape so no overspray could reach the fabric. I also made sure I could spray all the way up to the top of the legs so those orange rings near the seat wouldn’t peek through.

img 37970 5

Once the chair was masked off, the actual spraying took only a few minutes. The legs were dry and slightly chalky, so they accepted the paint without sanding. Quick jobs like this tend to have prep time that’s longer than the painting itself—worth every minute for a clean result. And yes, the chair was resting upside down on a recycling bin while I painted. Sometimes you make do with what’s on hand.

img 37970 6

Spray painting tips I follow every time:

  • Invest in quality spray paint instead of the cheapest can. A good nozzle and even spray make the job easier and the finish better.
  • Keep the can moving in smooth, even passes. Don’t stop in one spot or you’ll get drips.
  • Hold the can about 8–10 inches from the surface to achieve a fine mist rather than a heavy coat.
  • Apply multiple thin coats rather than one heavy one. Three thin, even layers build a durable, smooth finish.
  • Spray outdoors or in a well-ventilated area, and wear a proper respirator or mask. Follow the manufacturer’s drying and curing recommendations—typically allow at least 24 hours.
  • To reduce lingering fumes once the piece is indoors, consider sealing the finish with a low-VOC clear coat designed for painted surfaces.

img 37970 7

The new finish is subtle and a lot more cohesive with the rest of the room. The quiet metallic sheen adds depth without calling attention to the chair legs, which is exactly what I wanted.

img 37970 8

For comparison, here’s the before again so you can see the change:

img 37970 9

It’s a small, inexpensive update that makes the chair feel more intentional in the space. Someday we might replace this chair with a thrifted or vintage piece that has turned legs or casters, but for now a $7 can of spray paint (and half of it still left for the next project) was exactly the right move. Consider this fair warning: the next vulnerable surface in this house might end up ORB’d.

P.S. I also shared a list of summer activities for kids over on BabyCenter today — so many ideas, so little time.

P.P.S. Did anyone else catch last night’s episode of Design Star? Cathy said “camel tone” in a way that cracked me up — curious what others thought about the new cast.