Objectales

Popular

How to Trim a Cased Opening and Half Wall

featured 42300

The wall opening is finished (more here). The drywall is up (more here). Now it was time to tackle the trim.

img 42300 1

I actually enjoy trim work. It demands focus and patience, but transforming rough edges into crisp white lines is very satisfying. Before I could get to the casing and baseboard, I needed to build the ledge for the half wall and install the door jambs.

img 42300 2

Our neighbors had a similar opening and treated their half-walls with a wood platform on top and trim beneath. We liked the balanced, finished look and the extra surface it provides for setting out dishes or drinks when entertaining. To mimic that effect, we picked up an 8″ wide, 4′ long pine plank to serve as the top ledge.

img 42300 3

The plank needed some trimming to fit. One end was simply cut shorter, while the other required a notch so the overhang would be even on both sides. We measured carefully (twice) to avoid mistakes and marked the board before cutting.

img 42300 4

I took the plank out to the driveway to make the cuts—using a jigsaw for the notch and a miter saw for a clean straight end.

img 42300 5

After cutting, I sanded all the edges to soften the corners. No one wants to snag an arm on a sharp ledge when the opening becomes a daily pathway.

img 42300 6

The fit was perfect on the first try—either a good omen or beginner’s luck. It looks long in some photos because the side trim wasn’t installed yet. Once the trim goes on, the ledge will have a small, balanced overhang similar to many windows in our house.

img 42300 7

We secured the ledge with a couple of nails at each end and plan to prime and paint it white to match the trim. With the ledge in place, we moved on to installing the door jamb.

Our opening used a standard jamb width of 4 5/8″, so I relied on a pre-packaged door jamb kit. The kit was intended for a standard 3′ door, so I bought an extra 6″ side piece to extend the top jamb to our needs.

img 42300 8

The jamb overlaps the framing to conceal the exposed drywall edges so the finished trim looks seamless. The kit instructions suggested assembling the jamb and leaning it in as one unit, but because our opening needed slight adjustments we hung each piece separately. I cut the short side first, held it in place, and nailed it with finishing nails.

img 42300 9

Next we slid in the short top piece and nailed it. The opening was beginning to read like a doorway. Trim would complete the transformation.

img 42300 10

We had to join two pieces to make the full 92″ top jamb since a single length that long wasn’t available. A careful seam, caulk, and paint will make that joint virtually invisible. I used a nail punch to sink every finishing nail so the jamb remains ding-free through sanding and painting.

img 42300 11

With the jamb installed and the ledge complete, we turned our attention to the trim. I won’t go through every step here—the process is the familiar one of careful measuring, mitered cuts on the saw, and precise nailing with a nail punch to protect the trim from dings. We trimmed both sides of the opening, on the kitchen and dining room faces.

img 42300 12

We also added a narrower trim piece beneath the ledge to give it more visual weight and to match the treatment on our picture window and other windows in the house.

  • We liked the look we’d seen on nearby homes and wanted it to feel cohesive.
  • Many of our windows have a ledge grounded by a smaller trim underneath, so the added piece helps the ledge feel like it belongs.

img 42300 14

We also reinstalled baseboard that had been removed during demo. Enough of the original pieces were in good condition that we didn’t need to buy replacements. Some paint came off during removal and re-hanging, but once everything is caulked and painted it will blend right in.

img 42300 15

Some baseboard and quarter-round will need to come up again when we install the new flooring, so we left those areas intentionally unfinished. Otherwise, we completed most of the trim so the space looks polished during ongoing construction.

Here are shots of the opening from both sides with the trim installed. It already reads much more like a doorway. We plan to paint the wood ledge white to fully integrate it with the rest of the trim.

img 42300 16

img 42300 17

To start making the spaces feel livable again, we moved some furniture back in. The kitchen stools are temporary placeholders; we’re planning lighter, counter-height stools—maybe acrylic—to avoid too much visual heaviness. Please excuse the temporary clutter; things will be much tidier once the finishing touches are in place.

img 42300 18

There’s still work to do—missing counters, more paint, cabinet refinishing, lighting, flooring, and a backsplash—but the opening has already changed how the space functions and feels.

img 42300 19

We also picked up the last cabinet for the peninsula from the ReStore. The cashier offered it for free because it had been left outside briefly by the donor and therefore couldn’t be sold under store policy. After airing it out and inspecting it for damage, it matched our existing cabinet doors closely—an unexpected win.

img 42300 20

The tape lines you see in some photos indicate where the peninsula will end and where a 12″ counter overhang will fall, helping us visualize the finished layout as other decisions come together.

Even with temporary chaos, the opening has increased daylight in the kitchen and improved sightlines. Once we paint the cabinets and install white counters, the kitchen will feel even brighter—anchored by mocha cork floors.

img 42300 21

Here’s a view through the opening now that trim is installed and the curtains are rehung. We love how the new doorway aligns with the large picture window and brings more connection between rooms.

img 42300 22

From the other direction, you can now enjoy the fireplace from the dining room—another great benefit of opening up the wall.

img 42300 23

A peek through the dining room into the office shows how the new sightlines change the feel of the whole first floor. Ignore the temporary items on the table and the boxed dishwasher—these are short-term details that will be resolved as the room comes together.

img 42300 24

From the other side of the room, we still plan to add a buffet, large art, and a rug to anchor the entryway area, plus final lighting to complete the dining space.

img 42300 25

One of the nicest surprises is the new sightline into the hallway from the office—seeing the sunny kitchen framed through the opening feels like a fresh perspective for the whole house.

img 42300 26

We didn’t catch Burger mid-sprint through the new doorway—he’s a blur—but Clara adapted immediately and now loves the new route. She tests anything new, smiles, and then acts like it’s always been that way. Burger has adjusted to the flow too; he cuts through there frequently.

img 42300 27

For perspective, here are a few photos from the same angles taken shortly after we moved in last December—what a difference eleven months can make. There’s still more to do, but we’re making steady progress.

img 42300 28

img 42300 29

img 42300 30

img 42300 31

img 42300 32

When it comes to cost, finishing the opening ourselves—drywall, door jambs, ledge, and trim on both sides—ran about $90 in materials. Hiring a contractor for the work would have been roughly $250, so doing it ourselves saved a significant amount.

img 42300 33

We saved around $160 and gained a brighter, more open layout. What did you work on this weekend? Any jamb, ledge, or trim projects going on? We spent quite a bit of time standing back and admiring the new doorway—and we’re happy with how it turned out.