Paint Rug Patterns: DIY Stenciling Techniques for Area Rugs
They say inspiration can come from anywhere, and Sheena’s story certainly made us smile. Here’s her note, retold in her own upbeat voice about how she turned a tiny fabric sample into a full-size, reversible kitchen rug.
Hey John and Sherry (and Clara and Burger too!) — I wanted to thank you for a bit of unintentional inspiration. After seeing Clara’s dollhouse, I fell in love with the small fabric pattern used as a rug in one of the tiny rooms. I decided to recreate that pattern on a real rug using a plain mat, a sheet of foam insulation as a stamp, a couple of paint samples, and a foam brush. Think “Honey, I Shrunk the Kids” in reverse—only with home decor. 🙂

The basic idea: carve a stamp from a 3/4-inch sheet of insulation foam, load it with paint, and repeat the pattern across the rug. You could also use thick cardboard or packing foam if insulation isn’t available. For better grip while stamping, I glued a small wooden block to the back of the foam and added two folded pieces of cardboard to frame the outer square.

I started by brushing paint (Valspar’s Secluded Garden) onto the exterior square of the foam stamp using a small foam brush, then stamped the measured center of the rug first so the pattern would be balanced.

Working outward from the center, I repeated the stamp until the entire rug had a basic lattice layout. Once the grid was in place, I switched to a smaller interior stamp and filled each square with the inner motif.


After stamping, I used the foam brush to sponge paint into and around the stamped areas to smooth the look and make the pattern read better from a distance. The sponged paint gave a soft, painterly finish that blended the stamped outlines with the rug’s fibers.

Once I finished, I let the rug dry for a full 24 hours to avoid tracking paint throughout the house.

But the project didn’t stop there—this rug is reversible. For the other side I taped off two-inch stripes with masking tape and took the rug outdoors for spray painting. I found that spray paint preserved the rug’s texture better than the sponged-on latex paint, and it created a clean, graphic striped side perfect for swapping in depending on the mood.


Materials and cost
- Rug: $20
- Paint: $6 (two sample jars)
- Foam insulation: already had
- Foam brush: already had
- Masking tape: $4 (used only a small portion)
- Spray paint: $4 (used leftovers)
- Total: $34
For $34 I ended up with a washable, reversible rug that brings pattern and color into our kitchen and gives tired feet a soft spot to land by the sink. The yellow-striped side is a favorite in our house, and flipping the rug instantly changes the room’s vibe. Not bad for a quick, inexpensive weekend project!

It’s fun to see a tiny dollhouse swatch inspire a full-size home accessory. The reversible idea makes the rug versatile and adds an extra layer of creativity to the project. If you’d like more detailed step-by-step instructions, Sheena has a full tutorial on her blog covering both the stamped side and the striped side.








