Objectales

Popular

Install a Dual-Flush Toilet Kit to Save Water

featured 26263

Did you know you can convert a standard toilet into an efficient dual-flush model in under an hour with no plumbing experience? A dual-flush conversion is a simple, affordable upgrade that gives you the benefits of a modern, water-saving toilet without buying a whole new fixture. By switching to a dual-flush system you can cut water use for many flushes and potentially lower your water bill. Follow these clear steps to complete a quick and reliable dual-flush conversion on most standard toilets.

Dual flush conversion kit installed in a toilet tank

What Is a Dual-Flush Toilet?

A dual-flush toilet offers two flushing options: a lower-volume flush for liquid waste and a higher-volume flush for solids. Traditional single-flush toilets typically use 1.6 gallons per flush (GPF), which can be more water than necessary for liquid-only uses. Dual-flush systems commonly use around 0.8–1.1 GPF for the partial flush and a higher volume for the full flush. Because many bathroom visits don’t require a full flush, installing or converting to a dual-flush setup can significantly reduce water consumption. According to the EPA, dual-flush toilets can reduce household water usage by as much as 67% in some cases.

Dual flush toilet converter kit on a toilet set

Dual-flush toilets are easy to recognize by their split button or dual-action lever; the two options are often indicated with one or two water-drop icons to show the different water volumes each selection uses.

Converting a Toilet to Dual Flush

Most standard toilets can be retrofitted with a dual-flush conversion kit in under an hour using basic tools. The kit we used was affordable (around $25) and installation was straightforward. Below are step-by-step instructions to convert your toilet using a typical conversion kit.

Step 1: Remove the old flush handle

Start by removing the existing flush handle. Some kits advertise tool-free installation, but in many cases a wrench or pliers are needed to loosen a tightly fastened nut. Take care when loosening hardware to avoid scratching or cracking the porcelain. This is usually quick and simple.

Step 2: Remove the toilet flapper

Open the tank and detach the flapper and its chain from the flush valve. This step typically requires no tools. You may choose to turn off the water supply to the tank to avoid dipping your hand into tank water, but it’s optional for most conversions.

Removing old single flush lever from toilet

Step 3: Attach the dual-flush converter base

Place the lower portion of the dual-flush tower into the flush valve seat where the old flapper sat. Ensure the converter fits snugly over the seal so the tank won’t leak into the bowl and cause a running toilet. A tight fit prevents slow leaks and ensures reliable operation.

Sliding dual flush converter onto toilet tank gasket

Most kits include a rubber band or clamp to secure the converter and a zip-tie or strap to hold it in position. Be careful not to discard any small parts during unpacking—some kits include backup fasteners in case something is accidentally cut or removed.

Placing dual flush converter into toilet tank

Step 4: Install the flush tower

Set the rest of the flush tower into the base. Most towers click or twist into place with a simple drop-and-twist motion. The internal controls typically include adjustable sliders to set the partial and full flush volumes. These sliders let you fine-tune how much water each flush uses.

Placing flush tower in toilet tank for dual flush conversion

Step 5: Attach the new dual-flush button

Install the new button assembly where the old handle was. This is usually hand-tightened, and hand-tightening is recommended to avoid cracking the porcelain. The button is split to provide a smaller flush for liquids and a larger flush for solids.

Attaching dual flush button to toilet tank
Dual flush toilet flush button on side of toilet tank

Step 6: Test, adjust, and observe water levels

Connect the button mechanism to the internal tower according to the kit instructions, then test both flush buttons. If the buttons don’t fully lift the tower’s internal flapper, adjust the position of the kit’s slider or the height of the tower. Small changes to the blue or green adjustment sliders will affect how much water each flush uses and how easily the button activates the flush.

After adjustments, observe the water levels and the difference between the partial and full flush. The partial flush should use noticeably less water and still clear liquid waste efficiently, while the full flush should provide the additional volume needed for solids. Fine-tuning usually takes only a few minutes and ensures consistent, reliable flushing.

Inside of toilet tank with dual flush conversion kit
Watching water levels after dual flush toilet conversion

We liked this conversion so much that we installed the same kit on two other toilets after moving. Once tweaked properly, both buttons operated consistently every time.

Install a New Dual-Flush Toilet

If you prefer not to retrofit your existing toilet, buying a new dual-flush toilet is another option. Prices on dual-flush models have come down, and many are comparable in cost to standard toilets. Installing a new toilet is a manageable DIY project for most homeowners. Common models and price points (at the time of writing) include:

  • Project Source Dual-Flush Toilet — approximately $99
  • Glacier Bay Dual-Flush Toilet — approximately $160
  • American Standard Dual-Flush Toilet — approximately $260
  • Kohler Dual-Flush Toilet — approximately $315

When shopping, look for features that improve performance and comfort: a wider trapway reduces clogs when using lower flush volumes, and an elongated bowl with comfort (chair) height tends to be more comfortable for most users.

Other Toilet How-Tos

Now that you’re familiar with dual-flush conversion, here are additional guides and topics to explore for maintaining or upgrading your bathroom:

Kohler Memoirs toilet in marble bathroom with wall molding
  • How to Install a Toilet
  • Choosing a Favorite Toilet Model
  • How to Fix a Rocking Toilet
  • How to Unclog a Bathtub Drain Without Chemicals
  • Convert a Toilet to Dual Flush — troubleshooting and follow-up tips
  • Fixing a Backed-Up Toilet Line

*This post contains affiliate links and may earn a small commission when you buy products mentioned here, at no additional cost to you.